|
RE: Admiral Drawback Noise
With my previous Issue I emailed Bowtech and John Nelson responded very quickly. But I emailed Bowtech from their website yesterday with no response and I tried Johns Direct email and it is now undeliverable.......Any one know if he is still there? or are they just having Server issues?
|
RE: Admiral Drawback Noise
No Such luck. The cables wont fit through the gap.....
ORIGINAL: MOhunter46 ORIGINAL: Buck442 Mohunter....How did you get the cables off the roller guard? Wayne |
RE: Admiral Drawback Noise
I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise.
|
RE: Admiral Drawback Noise
ORIGINAL: bigcountry I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise. Derek |
RE: Admiral Drawback Noise
ORIGINAL: drockw ORIGINAL: bigcountry I have found a new culprit that causes a tick or creap on drawback. I found the bezel on the center pivots can cause it. I had a creak in my new guardian. I looked at everything. Even lubed the axles Finally I decided to totally disassemble. But I started taking off the bezel, and the thing was on there way too tight from the factory. I had to strain to remove. I was always told by bowtech and bowtech staff not to overtighten them but snug. Anyway, I heard the creak as I was loosening. And then I snuged it up and no more tick or creaking noise. Derek |
RE: Admiral Drawback Noise
ORIGINAL: Buck442 No Such luck. The cables wont fit through the gap..... ORIGINAL: MOhunter46 ORIGINAL: Buck442 Mohunter....How did you get the cables off the roller guard? Wayne Wayne |
RE: Admiral Drawback Noise
Got an email from Bowtech that instructed me to have my shop contact the Warranty Dept with no other details.
|
RE: Admiral Drawback Noise
Just picked mine up up from the shop last night and now quite as a church mouse. They messed with it a while and could not fiqure it out and then called Bowtech. I explained to them when I brought it in that I had emailed Bowtech and they said just call the warranty dept....Anyway after they called they were instructed thate there was not enough/or no lubricant where the limbs pivot at the center point on the black plastic looking tabs. They took the limbs off and placed some type of white looking gel there and she now is back to normal.
I pretty sure my Dream Bow is back! |
RE: Admiral Drawback Noise
ORIGINAL: Buck442 Just picked mine up up from the shop last night and now quite as a church mouse. They messed with it a while and could not fiqure it out and then called Bowtech. I explained to them when I brought it in that I had emailed Bowtech and they said just call the warranty dept....Anyway after they called they were instructed thate there was not enough/or no lubricant where the limbs pivot at the center point on the black plastic looking tabs. They took the limbs off and placed some type of white looking gel there and she now is back to normal. I pretty sure my Dream Bow is back! Another  for BowTech's service!Dan |
| All times are GMT -8. The time now is 08:57 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.