Any factory Bowtech gurus in here? I really need some help...
 

First off I need some help locating some parts....the rubber "o-rings" that surround and cushion the limbs in the limb pockets are torn and are getting smashed when I crank the bolts down. I can see how this would change my cam lean and might be the root cause my problem. I also need a new string and cable so I can start fresh there. I have a problem there too though...the lengths that were on the tag on the lower limb are worn off as well as the serial number. The bow is a 2000-2001(?) T-29 60-70 lb draw weight, and I didn't even know that I could register the bowwith theBowtech until it wasWAY too late (thank you pro-shop). Anybody that can give me any assistance, I would greatly appreciate it.

RE: Any factory Bowtech gurus in here? I really need some help...
 

Contact Bowtech through their website. Twice now I've written them about how to buy a replacement part and twice they just sent the part to me free, no questions asked.

RE: Any factory Bowtech gurus in here? I really need some help...
 

I would call them at 877-447-0293 or 1-541-342-4503. Just tell them what's up.

RE: Any factory Bowtech gurus in here? I really need some help...
 

Thanks for the info guys. I've tried to contact them in the past I was told to get in touch with a localBowtech dealer. Well I think it was my local that messed my bow up when he replaced the string and cable.

RE: Any factory Bowtech gurus in here? I really need some help...
 

I've talked to bowtech too...I'd just email or call'em back. I got a bunch of "e" clips from them for my guardian. I think they took a few days to get back to me via email. Probably best bet.

RE: Any factory Bowtech gurus in here? I really need some help...
 

Here is the string and cable length from 2003 model. They should be the same. Mine is a 2001 model with 2003 limb and cam.

String - 80 5/8”
Cables - 31 3/4”

If you contact BT, they'll probably send you the new limb bolt and retainer. The new retainer is the square instead of the round.

RE: Any factory Bowtech gurus in here? I really need some help...
 

you can probably get what you need from one of the guy over at Archery Talk

RE: Any factory Bowtech gurus in here? I really need some help...
 

MOhunting, yajsab and xibowhunter, thanks for the info. 80 5/8 & 31 3/4 sounds about right. I'm really in a hurry now since i was just notified about going to Iraq for a year.....need to kill something I can eat before I go!Camel and goat aren't too bad, but it doesn't compair to wild hog meat....ha!

Howare the newer limbs working for your bow? I've thought about getting newer limbs/cam but my local "dealer" said bowtech made some cam changes and I wasn't sure if they would work too well together so I just said hell with it...I figured it would be a huge mess to reconfigure the matrix/dynamics of the bow to make everything work correctly.

xibowhunter, you mention Archery Talk....are there Bowtech factory people there or really reliable Bowtech dealers? I only ask because of my cam lean problem, they might be able to get me close to the correct cam lean by telling me ROUGHLY how many yoke twists I need to make to get close to centered. I would think they have that kind of information as a starting point for setting up bows at the factory, maybe?

Thanks again for all the help. I really do appreciate it!

RE: Any factory Bowtech gurus in here? I really need some help...
 

The new limbs worked great as before. The new cam was included in the limbs. I didn't examine closely, but it looks like the old one. I'll have to compare the two to see the difference, just haven't done it.

RE: Any factory Bowtech gurus in here? I really need some help...
 

You need to go to a dealer. Bowtech is not going to sell directly to a consumer. Most companies have policies against selling directly to consumers. That's why they have dealers.

RE: Any factory Bowtech gurus in here? I really need some help...
 

xibowhunter...where is Archery Talk? is it another forum? I only see Bowhunting, Tech, Traditional, Gear Review, Bowfishing, Crossbows and Target....I tried Tech and got a self-inducedsharp reply from my post. Absolutely my fault since I wasn'tBORN with ALL the knowledge in the world about bows....and I wasn't all that patient and wait long enough for a reply to be posted...I guess I shouldn't have tested the patients of the people in here. I figured if this was a really good forum and it is set up to helpnew people getting into the sport, why is it taking so long for people to respond to my post?

bigbulls...thanks for the info I guess i'll have to give the dealer up in Lubbock a call.....not really looking forward to it, but....

RE: Any factory Bowtech gurus in here? I really need some help...
 

You're gonna have to go through a dealer to get parts. Unless other people is willing to part with theirs.