Rage wont work with cx maxima 350s?
 

My dad uses carbon express maxixa 350s and recently picked up some rage 2blades and they wont thread into the shaft? so i gave him my G5strikers that i havent used and they work is the rage bigger thread then anothers?

RE: Rage wont work with cx maxima 350s?
 

I can't figure out what is going on with that??? [&:]

I have CX Maxima Hunter 350's, as well as CX Aramid 350's, and I shoot the Rage 2-blade on both arrows and haven't experienced any of the problems that you mention. That's very odd??? [&:]

RE: Rage wont work with cx maxima 350s?
 

Ok update, we got one of the rage's on but still no luck with the other two could be something wrong with the rage heads? field tips go in fine....

RE: Rage wont work with cx maxima 350s?
 

Have not have any problems at all

RE: Rage wont work with cx maxima 350s?
 

Your threads may be crossed due to practicing. Mine fit fine but are a tad bit snug. Just take your time orpick another shaft.

RE: Rage wont work with cx maxima 350s?
 

Same here. Has to be an insert problem.

RE: Rage wont work with cx maxima 350s?
 

i do hav 1 arrow out of my dozen that will thread a field tip but not a rage i think i might hav a messed up insert or somthin?

RE: Rage wont work with cx maxima 350s?
 

If you take a particular arrow and a field point and/or another broadhead screw into the insert, but the Rage won't then the problem is not the insert. Period. So my suggestion is to try to screw all the Rage heads into an arrow that everything else fits. If the Rage heads won't go in then it's possible that the starter thread is messed up on the Rage, or they just weren't turned small enough. You may have gotten a bad batch.

If you have an arrow or two that are stubborn with any tip then the insert may be bad. Just chase the threads with an 8x32 finishing tap.

I doubt that the insert threads have been cross threaded, but it's possible.

RE: Rage wont work with cx maxima 350s?
 

could be your inserts. just a thought