Bowtech General.... Very Interesting.........
#11
Fork Horn
Join Date: Feb 2006
Location:
Posts: 133
RE: Bowtech General.... Very Interesting.........
Well I also agree with BigBulls that alot of archery issues get blown way out of porportion sometimes over the internet. BUT- this issue with the General is real and apparently is injuring people, and the best response Bowtech has is "a recall would be too large?" WTF!!! I have personally seen a General explode at full draw. Luckily my friend didn't get hurt. However, I still shoot a General and so far no problems but I think I might have to trade it in, because I always have that in the back of my mind when I draw that bow back.
I have been shooting Bowtechs for a long time and this is the 4th one I have owned. I really like BowTech bows. But after seeing this post- if my General explodes in my face- I'm done with BowTech, if that's the attitude they are going to have about this.
I hope thatthis postis just hearsay that has adapted throughout its course and maybe not entirely correct, but from all thatI have heard- AND PERSONALLY WITNESSED- I imagine its true, and I'm disappointed in Bowtech. JMO
I have been shooting Bowtechs for a long time and this is the 4th one I have owned. I really like BowTech bows. But after seeing this post- if my General explodes in my face- I'm done with BowTech, if that's the attitude they are going to have about this.
I hope thatthis postis just hearsay that has adapted throughout its course and maybe not entirely correct, but from all thatI have heard- AND PERSONALLY WITNESSED- I imagine its true, and I'm disappointed in Bowtech. JMO
#12
RE: Bowtech General.... Very Interesting.........
BUT- this issue with the General is real and apparently is injuring people, and the best response Bowtech has is "a recall would be too large?" WTF!!!
All manufacturers have an acceptable percentage of failures with any of their products. That's just the way it is.
From what I understand therehave been aproximately 15,000 generals produced and sold and how manygeneral failureslike this have there actually been?
#13
RE: Bowtech General.... Very Interesting.........
RefusetoFollow:
(877).447.0293 Phone number
http://www.bowtecharchery.com/main.php upper right, contact us button.
If you are so very concerned and don't like heresay, contact Bowtech yourself. Pretty good way to eliminate the middleman and heresay.
(877).447.0293 Phone number
http://www.bowtecharchery.com/main.php upper right, contact us button.
If you are so very concerned and don't like heresay, contact Bowtech yourself. Pretty good way to eliminate the middleman and heresay.
#14
RE: Bowtech General.... Very Interesting.........
ORIGINAL: mez
RefusetoFollow:
(877).447.0293 Phone number
http://www.bowtecharchery.com/main.php upper right, contact us button.
If you are so very concerned and don't like heresay, contact Bowtech yourself. Pretty good way to eliminate the middleman and heresay.
RefusetoFollow:
(877).447.0293 Phone number
http://www.bowtecharchery.com/main.php upper right, contact us button.
If you are so very concerned and don't like heresay, contact Bowtech yourself. Pretty good way to eliminate the middleman and heresay.
#15
Join Date: Sep 2007
Location: Antioch, IL
Posts: 661
RE: Bowtech General.... Very Interesting.........
ORIGINAL: bigbulls
Did Bowtech actually tell you "a recall would be too large"? Any manufacturer would do exactly the same thingby not issuing a recallwith the small number of real problems that they are having. If you were the manufacturer and have sold thousand and thousands of your product and .02% of them were having failures where someone was slightly injured would you issue a recall that would cost you millions?
All manufacturers have an acceptable percentage of failures with any of their products. That's just the way it is.
From what I understand therehave been aproximately 15,000 generals produced and sold and how manygeneral failureslike this have there actually been?
BUT- this issue with the General is real and apparently is injuring people, and the best response Bowtech has is "a recall would be too large?" WTF!!!
All manufacturers have an acceptable percentage of failures with any of their products. That's just the way it is.
From what I understand therehave been aproximately 15,000 generals produced and sold and how manygeneral failureslike this have there actually been?
#16
Guest
Posts: n/a
RE: Bowtech General.... Very Interesting.........
ORIGINAL: PABowhunter4life
Just yanked this from another site; this guy is a known DIEHARD Bowtech shooter so he can't be called for foul play here nor is there a conspiracy at hand............
Well I am not complaining...I love my bowtechs..!!
But I just want to share an experience..
While tuning a Bowtech General, Full draw in the draw board, it exploded!!
The axles pulled straight through the limbs...
Well after two broken fingers, and a broken arm.. I decided to call bowtech.
This is what they had to say...
"Yes we realize that there has been a problem with a batch of epoxy used on some of the General limb tips."
So I asked, why hasn't there been something done like a re-call.
They said," the recall would be too large."
I love my bowtechs and will continue to shoot them, they make a solid bow, but I think something needs to be done about this. I can't afford to have a broken arm and two broken fingers...this was a customers bow from MI. Sent to me for strings and tuning...
Just wanted to share my experience to get more acknowledgment about the situation....
Just yanked this from another site; this guy is a known DIEHARD Bowtech shooter so he can't be called for foul play here nor is there a conspiracy at hand............
Well I am not complaining...I love my bowtechs..!!
But I just want to share an experience..
While tuning a Bowtech General, Full draw in the draw board, it exploded!!
The axles pulled straight through the limbs...
Well after two broken fingers, and a broken arm.. I decided to call bowtech.
This is what they had to say...
"Yes we realize that there has been a problem with a batch of epoxy used on some of the General limb tips."
So I asked, why hasn't there been something done like a re-call.
They said," the recall would be too large."
I love my bowtechs and will continue to shoot them, they make a solid bow, but I think something needs to be done about this. I can't afford to have a broken arm and two broken fingers...this was a customers bow from MI. Sent to me for strings and tuning...
Just wanted to share my experience to get more acknowledgment about the situation....
#17
RE: Bowtech General.... Very Interesting.........
So we have a Mathews shooter jumping in on every blown up General post, starting new threads about the General, jerking quotes from all over the internet, etc.Throwsup a post from anther site, doesn't say where, doesn't say who, doesn't say how he came across the post and it is Gospel.We are supposed to believe that over direct words from the company? I guess my mom was right in always asking me, "When did you ever get the impression that there was an overabundance of common sense in this world?"
I guess If I was that concerned I would go to the source. I would also believe what the company told me over what a bunch of anonomous posters on a message board are saying.
I guess If I was that concerned I would go to the source. I would also believe what the company told me over what a bunch of anonomous posters on a message board are saying.
#18
Thread Starter
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 79
RE: Bowtech General.... Very Interesting.........
ORIGINAL: mez
So we have a Mathews shooter jumping in on every blown up General post, starting new threads about the General, jerking quotes from all over the internet, etc.Throwsup a post from anther site, doesn't say where, doesn't say who, doesn't say how he came across the post and it is Gospel.We are supposed to believe that over direct words from the company? I guess my mom was right in always asking me, "When did you ever get the impression that there was an overabundance of common sense in this world?"
I guess If I was that concerned I would go to the source. I would also believe what the company told me over what a bunch of anonomous posters on a message board are saying.
So we have a Mathews shooter jumping in on every blown up General post, starting new threads about the General, jerking quotes from all over the internet, etc.Throwsup a post from anther site, doesn't say where, doesn't say who, doesn't say how he came across the post and it is Gospel.We are supposed to believe that over direct words from the company? I guess my mom was right in always asking me, "When did you ever get the impression that there was an overabundance of common sense in this world?"
I guess If I was that concerned I would go to the source. I would also believe what the company told me over what a bunch of anonomous posters on a message board are saying.
First off, I could care less what brand anyone shoots. We are all in this TOGETHER as hunters and I think it is a real shame that so many have such an inferiority/security complex that everything has to be turned in to a "my bow is the bestest" thread. These aren't conspiracy quotes, feel free to surf the net and you'll find plenty of quotes and issues concerning the General. Maybe you have the time to sit here and make up fake quotes in an attempt to bash but I sure as heck don't.
My point with these General threads isn't that Bowtech is a bad bow, if Mathews were having the issues that the General is then I'd be all over them as well. This isn't about what bow is better, this is about the safety of our fellow archer..... PERIOD!!!!!
For years all we heard was that Mathews shooters were blinded by the limbs and blah blah blah, yet now here we are with a bow that has even diehard Bowtech shooters worriedbut the real fans are showing their true colors by turning a blind eye in an attempt to defend their bow brand, even if it means someone could get seriously injured. GET REAL!!!!
Again, for those who seem to really be missing the point.......this is not about who's bow is better, this is about a Bow with an obvious limb issue that needs addressed
#19
Thread Starter
Join Date: Jun 2008
Location: Pittsburgh, PA
Posts: 79
RE: Bowtech General.... Very Interesting.........
ORIGINAL: bigcountry
I guess a question for you, is why do you care so much? Do you shoot a bowtech general? It just appears, its very important for you to worry about bowtech.
ORIGINAL: PABowhunter4life
Just yanked this from another site; this guy is a known DIEHARD Bowtech shooter so he can't be called for foul play here nor is there a conspiracy at hand............
Well I am not complaining...I love my bowtechs..!!
But I just want to share an experience..
While tuning a Bowtech General, Full draw in the draw board, it exploded!!
The axles pulled straight through the limbs...
Well after two broken fingers, and a broken arm.. I decided to call bowtech.
This is what they had to say...
"Yes we realize that there has been a problem with a batch of epoxy used on some of the General limb tips."
So I asked, why hasn't there been something done like a re-call.
They said," the recall would be too large."
I love my bowtechs and will continue to shoot them, they make a solid bow, but I think something needs to be done about this. I can't afford to have a broken arm and two broken fingers...this was a customers bow from MI. Sent to me for strings and tuning...
Just wanted to share my experience to get more acknowledgment about the situation....
Just yanked this from another site; this guy is a known DIEHARD Bowtech shooter so he can't be called for foul play here nor is there a conspiracy at hand............
Well I am not complaining...I love my bowtechs..!!
But I just want to share an experience..
While tuning a Bowtech General, Full draw in the draw board, it exploded!!
The axles pulled straight through the limbs...
Well after two broken fingers, and a broken arm.. I decided to call bowtech.
This is what they had to say...
"Yes we realize that there has been a problem with a batch of epoxy used on some of the General limb tips."
So I asked, why hasn't there been something done like a re-call.
They said," the recall would be too large."
I love my bowtechs and will continue to shoot them, they make a solid bow, but I think something needs to be done about this. I can't afford to have a broken arm and two broken fingers...this was a customers bow from MI. Sent to me for strings and tuning...
Just wanted to share my experience to get more acknowledgment about the situation....
I was a big fan of the Tribute and was going to buy one in '06 but it was so close to November that I decided to wait and see what they offered for '07. Well, they introduced the center pivot designed Guardian and I was just not a fan of the riser design. The thing is the quietest bow I have ever heard but I simply did not like it. Honestly, I could very easily be shooting a Bowtech in a couple of months if they release something I like but if it has the center pivot on it no thank you.
This has nothing to do with trying to run Bowtech down, this is about a SERIOUS issue with an obvious limb design flaw. If there were Mathews Drenalin LD's popping all over the place you can bet your arse that I'd be all over them too. I'm not a fan boy by any stretch of the imagination; I am one strike away from being booted from their forum for calling them out on their imperfections. So don't go trying to make this in to a "Mathews shooter jumping in to threads". This is an archer looking out for fellow archers...... PERIOD!!
#20
Guest
Posts: n/a
RE: Bowtech General.... Very Interesting.........
ORIGINAL: PABowhunter4life
I'm not a fan boy by any stretch of the imagination; I am one strike away from being booted from their forum for calling them out on their imperfections. So don't go trying to make this in to a "Mathews shooter jumping in to threads". This is an archer looking out for fellow archers...... PERIOD!!
I'm not a fan boy by any stretch of the imagination; I am one strike away from being booted from their forum for calling them out on their imperfections. So don't go trying to make this in to a "Mathews shooter jumping in to threads". This is an archer looking out for fellow archers...... PERIOD!!
I never really understood it. For some reason, people live and die by internet forum advise. And its sad, is all I can say. Just like this one young fella on the other thread. You can't believe anything you read on these things. Have I had cracked limbs? You bet ya. From PSE, mathews, and bowtechs. Get em fixed, and get back to hunting.