Extreme RT 1000 sight question
03-05-2008 | 01:08 PM
#2
Nontypical Buck
Joined: Nov 2005
Posts: 3,399
Likes: 0
From: Mn.
RE: Extreme RT 1000 sight question
I just took off my RT900(29mm pins)and put on the RT1000 with 519mm pins and what a differance,It was 26 deg yesterday and got to sight it in at 20-30-40-50-60 yrds outside.......I really like it....I
Sure-Loc has come out with a nice 5 pin sight QC 1 Model 200 but its about 130 bucks compaired to 79.00 for the RT1000 thru BHSS....
Sure-Loc has come out with a nice 5 pin sight QC 1 Model 200 but its about 130 bucks compaired to 79.00 for the RT1000 thru BHSS....
03-05-2008 | 04:47 PM
#5
Giant Nontypical
Joined: Feb 2003
Posts: 7,051
Likes: 0
From: Jackson, Missouri
RE: Extreme RT 1000 sight question
They're good sights... close to great after this year's enhancements which include a pin guard right where the fiber optics come out of the plast tube and make that sharp turn to go inside the housing, as well as full-capture pins that actually give the fibers some support inside the guard (they look like half-moon discs that take up what used to be empty space where the fiber stuck through the pin.
The only improvement I would make on them now is the sight ring needs to be larger; if it was the same size as Spot Hogg's large pin guard I'd say they would have done about as well as they could with it.
Just make sure if you buy one you get all the above features I mentioned and not a leftover at a big retail outlet.
The only improvement I would make on them now is the sight ring needs to be larger; if it was the same size as Spot Hogg's large pin guard I'd say they would have done about as well as they could with it.
Just make sure if you buy one you get all the above features I mentioned and not a leftover at a big retail outlet.
