BoeTech Bows
#11
Join Date: Feb 2003
Location:
Posts: 162
RE: BoeTech Bows
I own 3 Bowtechs, an 02 Patriot, an 03 Patriot and a 05 Allegiance. I've had absolutely no limb problems despite many thousands of shots. I'd take the internet rumor mill with an appropriate number of granins of salt, be careful how you press your bow, shoot nothing lighter than IBO weights, and just go shooting.
#12
Join Date: Mar 2004
Location:
Posts: 881
RE: BoeTech Bows
Getting rid of cam lean. I noticed that changing the twist in the cables could make the lean better/worst. I got the perfect combination, which made the lean very little. Then I switched the top and bottom limbs. This put the weak side of the limb that allowed the cam lean onto the opposite side. This made the weak side of that limb mean nothing, because the cam can only lean one way. I have gotten rid of all of my cam lean
As for the split yokes, I'm didn't mean to put the yokes onto the limbs. If they made the limbs wider and put another cable slot, they could split the cable and have two post. They would still attach to the cam, but on both sides instead of one.
As for the split yokes, I'm didn't mean to put the yokes onto the limbs. If they made the limbs wider and put another cable slot, they could split the cable and have two post. They would still attach to the cam, but on both sides instead of one.
Thread
Thread Starter
Forum
Replies
Last Post
BowBuilder
Bowhunting
20
06-14-2006 10:11 AM