HuntingNet.com Forums - Bowtech Limb Screws

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Bowhunting Gear Review (https://www.huntingnet.com/forum/bowhunting-gear-review-31/)

- - Bowtech Limb Screws (https://www.huntingnet.com/forum/bowhunting-gear-review/111536-bowtech-limb-screws.html)

zak123

09-04-2005 06:27 PM

Bowtech Limb Screws

I brought my Bowtech Allegiance up to a bow shop to have the top limb bolt lubed. The guy fixed the limb bolt, but he did not loosen the screw on the side of the limbs before backing them out. He cranked the bow up to 70, and then back down to 60. Would this one time accident hurt my bow?

ranchand99

09-04-2005 07:52 PM

RE: Bowtech Limb Screws

I did it to my Diamond a few times,before I found out not to.Who needs directions right?:DWell,it seems to be fine.When I loosen the side bolt,and adjust the limbs,I can't really tell any movement when I look at the hole,on the opposite side of the bolt,it seems like it always stays centered with the slot.....I am not a pro by any means though;).Hope I helped.:D

bigbulls

09-04-2005 08:58 PM

RE: Bowtech Limb Screws

Other than scraping the camo finish off of the limb pockets it shouldn't hurt anything.

I might find another pro shop though if he doesn't even know to loosen the set screws before adjusting the poundage.

zak123

09-04-2005 09:07 PM

RE: Bowtech Limb Screws

Thanks for the help guys. I guess I posted in the wrong forum, huh? [8D]Sorry about that mods.

All times are GMT -8. The time now is 02:23 PM.