RE: 385 gr. grat plains bullets ?
 

I like Tahquamenon's way better;):D Your turn KenL;)

RE: 385 gr. grat plains bullets ?
 

Newmi, your "ALL CAPS" make it sound like you're shouting...:D
Maybe I'm missing something...let me ask it this way...if you shot a 5 shot group into the same single perfect .50cal size hole, what would you say it's group size would be?

RE: 385 gr. grat plains bullets ?
 

Ok guys, I didn't mean to start an argument here. hehe. My 1/4 inch group is 5 shots with no more than 1/4 inch of paper between them. Edge of hole to edge of hole. Maybe I was just lucky, but thats how I measured the group. I am going to try it at 100 yards and see what I get. By the way Cayugad the bottoms are belled, not flat, and I was not using anything between the bullet, and the powder. :)

RE: 385 gr. grat plains bullets ?
 

Well roundball it would appear that your elevator does not go to the top floor;)I f i were to shoot five shots into the same single perfect .50 cal. size hole i would call that perfect!!!!!!!!! By your definition of measuring you would call that a half inch group!!!!!!!! Would you care to elaborate further on the correct way to measure a shot group????

RE: 385 gr. grat plains bullets ?
 

No need for name calling newmie...
And sure I'll elaborate...my question to you is really quite simple:
Using your way of measuring, what would be the measured size of the group?

RE: 385 gr. grat plains bullets ?
 

I would call it a pefect 1 caliber size group! What would you call it Roundball?,you have yet to tell me.this would be the second time i asked.;)

RE: 385 gr. grat plains bullets ?
 

KENL, The letter's after the 385 stand for "HOLLOW BASE HOLLOW POINT"
That is a very tight group your shoot'n, can't get any better than that!!;)