Knight Disc Extreme
Got the new Disc Extreme cleaned, scoped and the Lehigh Defense bare 209 conversion installed. I'll be getting her out later this week and run some loads through it.
Watch for range report. Will add pic with targets. |
It will fun to get out and punch some holes. Hope the excursion goes well for you.
|
Nice, you took advantage of a good deal. Have fun dialing it in!!
|
If you have any primer issues watch this video on how to head space. Its fairly simple. Should work with the FPJ bolt and Lehigh adapter too.
|
Originally Posted by Gm54-120
(Post 4391771)
If you have any primer issues watch this video on how to head space. Its fairly simple. Should work with the FPJ bolt and Lehigh adapter too.
https://youtu.be/cqgD68vbukk |
I'll be waiting for the report with baited breath Bronko. (I know I have baited breath because we had shrimp for dinner.)
|
Originally Posted by Semisane
(Post 4391850)
I'll be waiting for the report with baited breath Bronko. (I know I have baited breath because we had shrimp for dinner.)
|
I do the head spacing a little different but ive been lucky that none of mine needed shims. The biggest deal is start with the longest primer such as a Win209 or Fed209A. If any are oddly short, sort them out and use them for something else. Your "window" is .003-.005 with a max of about .006 crush. That way you wont ever accidentally get it too tight if you change primers. Now days though you may want to start with whatever primers you have the most of. The Lehigh plug works fine with all powders and you dont need mags to ignite BH209.
I got 1 custom plug that will crush longer Win209s to .006 and that same plug will crush a Fed209A to .003. Variations from lot# to lot# of primers can be pretty big so make sure to measure them before doing any head spacing. More recent Win209s might actually be smaller on average than the Feds. They do vary more in the same box and the Feds are a little more consistent in length. |
And another FYI, if you ever wish you had a fast twist 45,,,,,,,,Knight sells a Mountaineer 45 1-20 barrel for $350. All of your parts except the breech plug will fit. The Lehigh NFPJ adapter might need a minor amount of metal removed but its very simple and wont effect how it works with the Extreme barrel either.
|
All times are GMT -8. The time now is 03:38 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.