Paper Patching Tip
#21
You're right Lewis. They hang over about 1/32" or so. They do adhere to the tape really well and are easy to fold over the edge. But they still easily start down the barrel. I believe the felt wad will make up for the overlap. I'm really more interested in how the ones with the scotch tape will do. If they work good I may just try these:
https://www.amazon.com/Scotch-599039153097-010-300M-300-Pack-Adhesive/dp/B0058FCFOG
They also have these at Wal-mart: https://www.walmart.com/ip/Glue-Dots-Clear-Dot-Disposable-Dispenser-200-Count/19861739
https://www.amazon.com/Scotch-599039153097-010-300M-300-Pack-Adhesive/dp/B0058FCFOG
They also have these at Wal-mart: https://www.walmart.com/ip/Glue-Dots-Clear-Dot-Disposable-Dispenser-200-Count/19861739
Last edited by bronko22000; 09-03-2019 at 04:38 PM.
#22
It just dawned on me, I shot the 11MM RCBS Bullet Recently (on Video) I Short Patched them, and I CLEARLY remember Taping the Bases with Packing Tape, I Just layed a Short Piece of Packing Tape down on my Counter Top, After i Short Patched a Bullet i Put it on the Tape, Firmly Pushed to make sure it was Stuck good, Then used Scissors to Trim excess Tape from Around the Base, They Shot Good I do SO MUCH Stuff, with SO many different guns that it’s EASY to lose track of things i have done. Maybe i spoke of this Elsewhere? I clearly remember doing it Now
.447 From my Mold
Sized to .442
Short Patched, Bases Taped With Packing Tape, excess Trimmed.
.447 From my Mold
Sized to .442
Short Patched, Bases Taped With Packing Tape, excess Trimmed.