Knight MK85 up grades
 

I added a Lyman 17 AHB globe sight, a Lee shavers insert set. I put a shim under the Williams peep and it shot real well. The last time I shot it I could tell that when I move out to 200 and 300 yards my cheek was going to be off the stock or close to it. I picked up a cheep rest on Amazon to lift it a bit. It has another piece to raise it higher but I am going to try the lower one first. The lower one feels good when looking through the sights set at 100 and 150. I raised the sight all the way and I think it is going to work well.

very nice set up. I bet that is going to work wonderful for you.

Looks good Ron. Let us know how it works out...

Nice looking setup and should work very well for you. Are you using PPB's with this rifle as well?

Yes I am using the Lee 500 S&W bullet.

200 and 300 yards??? I bet Mr Knight would be amazed at what guys are doing with his rifle and what they are doing they are doing it well. I have never taken a shot longer then 100 yards with mine.

Ron,
Is that the 440 gr bullet?

The lee mould is made and the weight is figured on the old Lyman #2 alloy or something like that. With softer lead, I use lead that is between 6 and 7 BHN the bullets weigh 458 grains in one hole and 460 in the other.