TC Fire Hawk barrel?
11-26-2015 | 05:40 AM
#1
Thread Starter
Fork Horn
Joined: Apr 2010
Posts: 147
Likes: 0
From: South Dakota
TC Fire Hawk barrel?
Does anybody have any idea as to whether a TC Fire Hawk barrel assembly would fit on a TC black Diamond stock? Basically could I just take the barrel assembly off my Black Diamond and would the Fire Hawk assembly fit right on? Thanks guys.
11-26-2015 | 08:54 AM
#3
Boone & Crockett
Joined: Mar 2007
Posts: 11,410
Likes: 1
From: Comance county, OK
The FireHawk barrel and action assembly will not fit the Black Diamond stock without modification.
Actually the FireHawk has a much better arrangement: There is a front action screw. The rear trigger guard screw is also the second action screw.
When TC made the the Black Diamond they eliminated the separate front action screw. The two trigger guard screws are also the action screws, a somewhat flimsy arrangement.
Actually the FireHawk has a much better arrangement: There is a front action screw. The rear trigger guard screw is also the second action screw.
When TC made the the Black Diamond they eliminated the separate front action screw. The two trigger guard screws are also the action screws, a somewhat flimsy arrangement.
11-26-2015 | 12:06 PM
#4
Thread Starter
Fork Horn
Joined: Apr 2010
Posts: 147
Likes: 0
From: South Dakota
thanks Falcon that answer's my question. I was wondering because I saw there was a good looking SS barrel assembly for a Fire Hawk on ebay for fairly cheap and thought if it would fit I'd get it.
