Buck With a Patched Round Ball
10-18-2015, 08:57 PM
#1
Boone & Crockett
Thread Starter
Join Date: Mar 2007
Location: Comance county, OK
Posts: 11,408
Buck With a Patched Round Ball
Today was the second day of Ft. Sill conventional muzzleloading deer season. Beat the brush for several hours before settling in a stand overlooking a pond that deer had been frequenting.
At about 19:15 i heard an animal drinking water. At the far end of the pond stood a buck. i fired and the buck went down, flopped about one minute and expired.
The ball took out three ribs and left an entry hole over 1 1/2 inches in diameter: It may have hit a branch before striking the buck. The ball did not exit. My camera went dead, i'll post a photo of the hole tomorrow.
Distance: About 45 yards
Gun: .54 TC New Englander
Powder: 120 grains of Black MZ
Ball: .530
Primer: Winchester #11 magnum
Patch lube: Leath R Seal
No exit needed:
http://i290.photobucket.com/albums/l...r/DSC01880.jpg
At about 19:15 i heard an animal drinking water. At the far end of the pond stood a buck. i fired and the buck went down, flopped about one minute and expired.
The ball took out three ribs and left an entry hole over 1 1/2 inches in diameter: It may have hit a branch before striking the buck. The ball did not exit. My camera went dead, i'll post a photo of the hole tomorrow.
Distance: About 45 yards
Gun: .54 TC New Englander
Powder: 120 grains of Black MZ
Ball: .530
Primer: Winchester #11 magnum
Patch lube: Leath R Seal
No exit needed:
http://i290.photobucket.com/albums/l...r/DSC01880.jpg
Last edited by falcon; 10-19-2015 at 08:23 AM.
