Knight Question
 

Does anyone know if the front sight dovetail is 3/8""
Thanks.

I am sure it would be the normal 3/8". Must be a in an older Williams front ramp.

So that's what the older ones had, Williams. Thanks!!

Yep! they were 3/16" Williams Streamlined Ramps with a 1.625" hole spacing

What measurement was the 3/16"?

That is the height from the barrel to the bottom of the Dove Tail.

Thanks, I wonder if Williams has a shorter one?

Not that will fit a Knight. They do have shorter inserts for the ramp sight.

I normally use a .312N fire sight insert in the ramp. More than likely the bead you have in there now is a .375 bead. If you push the insert out - it might say on the bottom of it what height it is.

This link will take to the inserts - fire sight inserts. They start at .260N and get taller - the 'N' stands for 'Narrow'

http://www.brownells.com/rifle-parts...prod16338.aspx

You might also want to look at a fire sight hood. Adding this to you ramp and if you are looking through a peep you will get the illusion you are looking through a 1X scope.

http://www.brownells.com/rifle-parts...prod16338.aspx

I got the hood a while ago. Thanks for the help