Nosler Partition
The bullet is the 300g Nosler Partition. The plywood sandwich was added to the front of the jugs, and knowing from past experience that the Nosler is a deep penetrating bullet, an extra jug was added to the back. The load was 80g Blackhorn, short black Harvester sabot, W209 primer. Range was 25 yard. The first jug, and the fourth jug remained on the horse after all was done. The first and second jugs were shredded by the Nosler; it seems strange the first jug was able to remain seated. The bullet went through the five water jugs, and into the Laundry jug, where it stayed. The photo shows the actual 'partition' between the front, and back of the bullet, that John designed, and tested back in the Nineteen hundreds. John started manufacture, and selling his design in 1948, did he not? |
Ron,
Just curious why your changing how you test the bullets? You started at 50grns of BH209 and now your 80 with different bullets. |
I am assuming he changed it to get a more realistic speed of impact for the average hunter. Not a lot of us try taking game at 250-300 yards with a MLer so at 80 grains he is getting a more reasonable speed of impact that your average Joe Hunter will be hitting game at. Just my guess.
|
Originally Posted by super_hunt54
(Post 4206792)
Not a lot of us try taking game at 250-300 yards with a MLer .
|
Originally Posted by super_hunt54
(Post 4206792)
I am assuming he changed it to get a more realistic speed of impact for the average hunter. Not a lot of us try taking game at 250-300 yards with a MLer so at 80 grains he is getting a more reasonable speed of impact that your average Joe Hunter will be hitting game at. Just my guess.
|
Originally Posted by Grouse45
(Post 4206795)
It was nice seeing the different bullets at the same velocity. 30grns of BH209 is huge. Maybe he will do the others the same way.
|
Originally Posted by 1874sharpsshooter
(Post 4206794)
Well then its time to get on the stick and change that :)
|
Originally Posted by super_hunt54
(Post 4206792)
I am assuming he changed it to get a more realistic speed of impact for the average hunter. Not a lot of us try taking game at 250-300 yards with a MLer so at 80 grains he is getting a more reasonable speed of impact that your average Joe Hunter will be hitting game at. Just my guess.
|
Originally Posted by super_hunt54
(Post 4206792)
I am assuming he changed it to get a more realistic speed of impact for the average hunter. Not a lot of us try taking game at 250-300 yards with a MLer so at 80 grains he is getting a more reasonable speed of impact that your average Joe Hunter will be hitting game at. Just my guess.
|
Originally Posted by ronlaughlin
(Post 4206804)
My thinking exactly.
With BH would not need to keep the bullet weights near the same due to the progressive burning properties of BH. That is if you are working on building a comparative base. |
All times are GMT -8. The time now is 10:49 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.