Originally Posted by Grouse45
(Post 4189221)
Ya, I shot right thru one. lol
I ordered another one should be here Friday. |
Originally Posted by bronko22000
(Post 4189206)
Sabot by the way those cut outs look on the bullet they may not expand very much if at all but the design should cause havoc by a hydraulic push of the body fluids. Probably much like the way a hollow point does after expansion of the petals. So with adequate velocity you would get deep penetration and a good wound channel. Seems to be a good elk, bear bullet but IMO a bit too much for deer except at longer ranges.
The bullet is designed to do as you suggest + have great penetration. The effective range is totally dependent on velocity. To get the true hydraulic action the bullet need to be traveling at least 600 fps but even then if it were traveling slower you still will get very deep penetration. I would not hesitate using it on deer. I am old the last thing I want is the animal to travel after being shot. |
Originally Posted by 1874sharpsshooter
(Post 4189224)
I have 3 more gongs set up for 3,4,and 500 yards . Now if only the 230 gr bullets would come out . I even put a monarch 4x16 mildot scope with burris ring inserts of +10 in the front and -10 in the back on the 1:20 Disc . :s4: i took a lot of flack for a mildot on a muzzleloader :s4:so it better be worth it .
XP .400 185gr .400 200gr .452 250gr .452 275gr CF .400 185gr .400 230gr .452 250gr .452 275gr |
Originally Posted by WV Hunter
(Post 4189233)
Nice job SL. That is one wicked looking bullet for sure!
The design is definitely interesting, and I am also curious to see how they perform in the real world. But I also wonder, which design will prove to be more effective on a marginal shot.... bloodline or xp? I guess time and field reports will tell. What kind of medium you gonna try and use Mike? I think I am going to make a concouktion (sp) (trying to simulate the density of blood and organs) in the garage and contain it in a plastic gallon milk jug to simulate an organ membrane (a really tough one). I am thinking I will shoot the bullet through two 2x6" planks then a space into the jug lengthwise and out through two more 2x6's. I would like to see this very effect... look at these tubes of coagulated blood that came from a recent deer harvest. |
I was under the impression the muzzleloader bullets would be made of brass and the pistol made of copper. The link to Lehigh indicates this is a copper bullet. What material does the supplied bullet appear to be made of? Maybe I just misunderstood.
|
Originally Posted by stude 283
(Post 4189293)
I was under the impression the muzzleloader bullets would be made of brass and the pistol made of copper. The link to Lehigh indicates this is a copper bullet. What material does the supplied bullet appear to be made of? Maybe I just misunderstood.
http://www.lehighdefense.com/collect...s/muzzleloader |
If you click on the 250gr bullet in the link you provided it says all copper bullet. Just goes to show you cannot always believe what you read.
|
I had never really thought about this until a member on another forum posted this thought:
That bullet with "Those flutes will be like a drill bit and blender when the bullet hits ." Never thought of it that way but I think you 'nailed it' Not being the best gun nut in the world - I wonder what the RPM of that bullet might be at 100 yards? He answered back muznut" source="/post/174571/thread" timestamp="1426165282" Dunno how fast that bullet will be going at a 100yrds but your speed of 1950 at the muzzle with a 1:28 twist it will be spinning at 50142.9 RPM's |
Originally Posted by stude 283
(Post 4189359)
If you click on the 250gr bullet in the link you provided it says all copper bullet. Just goes to show you cannot always believe what you read.
|
All times are GMT -8. The time now is 12:00 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.