Sabot for .44 deep curl
 

Just got a box of .44 cal 240 grain deep curl bullets and also got some harvester black crush rib sabots but the slide right down the barrel. What sabot do i need so its a tight fit to shoot this bullet.

Green crush ribs.

You need the .50 caliber sabots for .44 caliber bullets, as seen here.

http://www.grafs.com/retail/catalog/...productId/5464

The black crush rib are for .451/.452 sized.

Those bullets are awesome! They fly very well and deliver excellent terminal performance. My favorite bullet for hunting in my .50 cal rifles.

Those Deep Curls in 44 cal are .429 diameter. You don't want any crushed ribbed sabots. You want these below...

https://www.midsouthshooterssupply.c...ullets_50_Pack

or.....

https://www.midsouthshooterssupply.c...abots_50_Count

Not a thing wrong with MMP sabots and right from the source.

http://mmpsabots.com/store/mmp-standard-sabots/

:D Al

I shoot the green crush rib sabots in my knights. They give good accuracy, and load nicely. Obviously you can try several different sabots to see what works/fits best in your gun. Just make sure they are green, not black - for those bullets.

The .44 deep curl (240grain hollow point) is my go to bullet. I use Harvester green crush ribs in my TC Omega and the Harvester green smooth in my Knight Disc Extreme. In a pinch I can use either sabot in either gun, the difference in accuracy is slight, as is the ease in loading.

I'v also used MMP regular green sabots with similar success at the range.

My Omega and Knight Vision are just the opposite. The bore of the Knight is smaller in diameter. That one needs crushed ribs and my Omega needs the regular.

Just ordered some green harvester green ones. Thanks guys