Felt Wads for the .45 GM/TC Renegade
 

In my recent post titled "Heavy Lead in the .45 GM/TC Renegade" I mentioned using some commercial .50 caliber felt wads under the bullets, and that the wads were difficult to get into the bore.

Not only was it a tedious process, it was hard to get them in flat without cocking. The wads were Bridgers Best (which I think is the same as Ox-Yoke) and have a measured diameter of .508/.509.

I won't have that problem in the next range session.

The home-cut wads in the picture below have a diameter of .458/.459. compressing easily into the muzzle and filling the grooves perfectly. I figure I'll be getting 1,728 wads from that piece of felt.

Good idea was that cheaper than purchasing outright?

JW

Nice Semi. Definitely should make things easier for you, and much more consistent I would think. :D

I spent $18 for the felt and $10.70 for the hollow punch, for a total of $28.70. I can get anywhere from 1,500 to 1,700 wads from that piece of felt, depending on caliber (having the option of punching wads for my .32, .50, and .54 caliber guns).

For about the same amount, $30.71, I could have gotten 400 Ox-Yoke 44/45 caliber dry felt wads from Track of the Wolf ($6.19 per hundred plus $5.95 shipping). http://www.trackofthewolf.com/Catego.../1/OX-WAD-44-D
Certainly, four hundred would last me a long time.

So I might be saving a few bucks, but it won't make me rich. It took me fifteen minutes to punch out 200 wads today.

What as waste of time. You coulda been watching a 'marion' movie, or something equally worthwhile.

Oops, sorry duke. It wasn't me duke. There is a bunch of fluff in the keys of the ekeeebored Duke. Hte lfulf id mesdnig withmy ytpign. Honest Duke, it couldn't have been me that typed Marion. iItd, wsa'nt em uDek.

LOL!!... you guys are too much to process!!

BPS

And how does the wife like her dining room table now????

Sorry just hadda!

JW

Shsssss! She hasn't noticed yet.