HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   Lyman GPH in 54 (https://www.huntingnet.com/forum/black-powder/384147-lyman-gph-54-a.html)

Olde NE Hunter 08-16-2013 09:21 PM

Lyman GPH in 54
 
I have my eye on a Lyman Great Plains Rifle in 54 caliber. What do all the experts think is a fair price?

High...Low...Average

Haven't actually held it in my hands (yet) so the condition is unknown.

Tundra10 08-16-2013 09:42 PM

No expert. Condition and past use is key.
Seen em go from low $300 to $400+ easy.

Depends one your market

bronko22000 08-17-2013 03:23 AM

I believe Tundra is right. Anything less than 300 for one in great shape is a real bargain.

Blackpowdersmoke 08-18-2013 07:09 AM

You didn't mention whether it is flint or percussion. Flintlock rifles generally command a higher price than percussion. If it's a good clean rifle with minimal usage marks and a good bore... offer $300, maybe a bit more if it's a flinter. But first, ask the seller if you can run a clean patch or two in and out the bore, that will give you an idea of how it's been taken care of. If the bore is rough or the patch comes out rusty I would pass on it

Olde NE Hunter 09-03-2013 06:59 PM

thanks
 
Thanks for you advice. I did get this rifle but have not shot it. Paid a little more than I first thought about but seems to be in good shape. It is a percussion rifle.

cayugad 09-03-2013 07:24 PM

you will enjoy the rifle. I have two of them. And love them both.

BP_Niccum 09-04-2013 07:21 PM

I love mine!

HuntAway 09-05-2013 06:28 AM

Here in Canada you can get one new for $525 or so.

HA

Jenks 09-06-2013 05:14 AM

I have an Investarm in .50 bore, I think they made the Lyman guns. Mine was made in the mid 1980's, I bought it used about two years ago. I love it, it was in great shape, probably had not been shot. The wood is much nicer then the T/C Hawken that I once had. The only "negative" is the low maximum charge that that Investarm recommends--90 grains with a PRB, 80 grains with a conical. It has a 15/16 barrel so I think it would handle more, but I stay with their recommendations. I think you will like the gun, congrats!!


All times are GMT -8. The time now is 02:02 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.