knight origional disc question
 

I have a nice and very accurate knight disc.Ibought a western conversion kit as i live in idaho but dont have a clue to switch it out.Seems knight is in its summer slow down so havent talked to a real people there. Can somebody help me out?

Might ask your question here:

http://forums.knightrifles.com/

The Western Conversion will include a new bolt housing, a new breech plug, and two percussion nipples; a #11 cap nipple and a Musket cap. And one combination breech plug tool.

You will need to remove the current bolt from the rifle and the current breech plug. Install a nipple in the new breech pug and install that in the rifle.

Getting the old hammer assembly out of the old bolt assembly does require or probably will require a tool. Before you take the old bolt assembly apart look at it very carefully to see how it is aligned.

Here are a couple of pictures that might help with bolt alignment...





This is a picture composite of the Western Kit...





If your rifle is an Original DISC you probably will need a 'C' tool to take the bolt apart. This last picture shows you how to use a 7/16" open end wrench to substitute for a 'C' tool if you do not have one.

Thanks sabotloader its great to have a forum like this and the good people willing to share thier knowlege!

Come north and let's go do some shooting! :cool2:

My buddy and i have been threatening to head that way ,if ever things slowed down.Ive got a pest control business and people keep puting money in my hand its dang hard to say no.but it sounds fun.We are sneaking over to brownlee in hells canyon wed. to play with the bass,crappie and cats,before the bats start showing up here. thanks for the offer