an eye opener on breechplugs
 

I going to originally send my old win apex (cva kodiak) breechplug to ron to be modified. I picked up an brand new one for it. started to clean up the old one up. noticed how much larger the flash hole was next to the new one. my jaw dropped. the flash hole on the old is around 3x to as much as 10x larger then the new.

needless to say, I am not sending the old one off now. after looking at it. it is well used. going to picked up another new one to have an unmodified plug.

side by side pic
left brand new right out of the package, right old plug

Corey,

If you were going to have Ron install a replaceable vent liner, Why, Why Why, Why, would you not want the used plug updated??????????????

The enlarged vent hole will be totally removed by drilling and Tapping for the removable, vent.

As long as the external threads of the plug are good, using a replaceable vent will make it an everlasting plug.

Yes, as Ken say, do.

Wow, that appears to be a great difference. What is the reason for the modification? To shoot black horn or just to extend the life of the plug?

If that worn plug is modified, the eroded flash hole will be replaced with a vent liner which will have a flash hole size the same as the factory new breech plug. So, essentially the plug will be 'reborn'.

Another good result is, the vent can be removed each time the plug is cleaned; making cleaning the plug so very very easy.

If the vent is installed correctly, the plug will become quite BH friendly. The plug with a vent installed will be as good igniting BH, as the new made for BH plugs now sold by CVA.

Instructions for how to modify the cva plug to successfully burn BH can be found here.

Well worth having Ron do your plug Corey.

ron, like i said in my pm, I want it to be done right the first time. if I go to do it, you may end up with it any way.

dave, I knew my breechplug was getting worn out but not that bad. kinda both. I am not an big fan of bh209, my win apex set it off fine but using an drill bit to clean out the flash hole worries me.

I want to give bh209 one more far trail.

Why would you worry about using a drill bit to clean with? You just turn it by hand. It doesn't take out any metal.

personal thing muley.

Bh209 or not, it doesn't hurt to use a drill bit anyway. The build up is from the primer.

Yep, and it's so fast with the drill. You can do it without even taking out the BP if you wanted to do it fast in the field, or range.

Breechplugs are cheap enough to buy and have an extra on hand. I have a new spare one on hand for all My MLers.
Also I've never used a drill bit to clean mine, I have a solid piece of stainless the size of the flash hole that I just push through it to clean. As I mentioned in a preveious Thread, I've never worn out a BP and I do shoot. That one you pictured Corey is quite the difference.

The drill is to clean the flash channel. Not the flash hole.

I thought we were talking about the CVA BP.

even cleaners hardly put a dent in the amount of carbon that builds up in flash channels.

the gun the breech plug was in shoot well, but I was finding myself with alot of blow back and having to use cooler primers to help my groups. blows any notes i had on the gun.

this is the only breech plug I have to replace. I lost on for my knight usak. bought two extras from my disc original. could not walk away from $5 a per.

I think it very fitting to post this Quote:


It seems more MLer Manufactures today are focused on making the Breechplug better. Im not talking about a (Quick Release) BP as being better, Im talking about what makes a BP just plain better than the rest, and why? Why do some allow minimal fouling and others will blow the powder in your face.:devil: I chose the name breechplug when I joined this Forum because I always thought the BP was one of the most Important parts of the ML. So why is it taking the Manufactures so long to develope a Great One? In your Opinion wich one do you think is the best and why?
(BP)

end guote