![]() |
Originally Posted by Boonechaser
(Post 3881746)
Don't have to be a member to read the threads. But, glad you are the forum detective.
|
Originally Posted by riversmokepole
(Post 3881734)
At least dont post on other forums about your Knight and then come over here again after you were banned with a differant name
|
Originally Posted by riversmokepole
(Post 3881748)
Your Busted EndeavorShooter
Sorry, i tried, but i couldn't keep from typing. |
Originally Posted by ronlaughlin
(Post 3881756)
You meant to write, " You're busted Endeavorshooter."
Sorry, i tried, but i couldn't keep from typing. |
well I don't know (or care) who is or isn't endeavorshooter, but when I had my problem with my breechplug I was using pink tape. The pink tape worked great in my knight disc, but it seems to be too thick for the mountaineer. I tried grease after I got it back from knight, but I can't take the mess.
FYI I just tried white tape and it works great! |
Originally Posted by josh...just josh
(Post 3881762)
well I don't know (or care) who is or isn't endeavorshooter, but when I had my problem with my breechplug I was using pink tape. The pink tape worked great in my knight disc, but it seems to be too thick for the mountaineer. I tried grease after I got it back from knight, but I can't take the mess.
FYI I just tried white tape and it works great! In my older Knights 4 of them I use pink and two other use white, so it is never a guarantee which tape you might use until you try them. One good point might be always start with white (thinnest) and see how it works... |
Originally Posted by josh...just josh
(Post 3881762)
well I don't know (or care) who is or isn't endeavorshooter, but when I had my problem with my breechplug I was using pink tape. The pink tape worked great in my knight disc, but it seems to be too thick for the mountaineer. I tried grease after I got it back from knight, but I can't take the mess.
FYI I just tried white tape and it works great! |
Originally Posted by riversmokepole
(Post 3881748)
Your Busted EndeavorShooter
|
Josh, I seen you say you was going to sell it anyway because it was not for you. What else did you not like and what did you like? I find the bare primer to be a pain to install with a scope installed and wish I had went with the disc model.
|
Originally Posted by Boonechaser
(Post 3881769)
Josh, I seen you say you was going to sell it anyway because it was not for you. What else did you not like and what did you like? I find the bare primer to be a pain to install with a scope installed and wish I had went with the disc model.
I don't like how hard it is too clean for one. The breech area stays relativity clean, but the lip on the bolt for the primer is a pain, and I have always found Knight breech plug threads to be somewhat hard to clean (since they are so far in). My biggest problem with it honestly is that is a bit heavy and long for the kind of hunting that I do. It is a perfect rifle for long range stuff, but southern Iowa is all hills, brush, and trees (not all of Iowa is flat and boring!). I do really like it though, it is a very well made and accurate rifle. I am torn about whether I should keep it or not. |
| All times are GMT -8. The time now is 11:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.