CVA wolf bore diameter
Anyone here know what the bore diameters are running on the CVA wolf rifles ? i have some .503 no excuse conicals on hand and i have someone coming out Sunday with a wolf rifle. he has a supply of variuos bullets he's bringing with him, but i thought we could give the NE's a try also.. Ray
|
if its the new wolf, .500 - .501
The old wolf will run the tighter .498-.499 bore. |
Originally Posted by MountainDevil54
(Post 3767196)
if its the new wolf, .500 - .501
The old wolf will run the tighter .498-.499 bore. |
I have owned nothing but CVA's for a long time, reguardless of the Bore Diameter wich ever it may be, the 240gr XTP's and a Harvester MMP HPH-24 Sabot have proved to be the Most Accurate out of all the CVA MLer's I have. Just My Opinion and what works for the Best Groups and Most Harvest for me.
(BP) |
Originally Posted by builder459
(Post 3767235)
wow pretty tight bored, didn't expect that.. thanks Ray
|
Originally Posted by Breechplug
(Post 3767319)
I have owned nothing but CVA's for a long time, reguardless of the Bore Diameter wich ever it may be, the 240gr XTP's and a Harvester MMP HPH-24 Sabot have proved to be the Most Accurate out of all the CVA MLer's I have. Just My Opinion and what works for the Best Groups and Most Harvest for me.
(BP) |
Originally Posted by oldsmellhound
(Post 3767325)
I was surprised too when I got my new Wolf. When using the MMP blue .50/.40 sabot and 200 XTP's it was very difficult to get them down the barrel. Almost impossible without swabbing between shots. When using the Harvestor Crush Rib & 250 grain Gold Dots, still tight but possible to reload without swabbing.
|
Originally Posted by builder459
(Post 3767332)
Almost sounds like a T/C barrel :wave:
My son's Wolf shoots the 200 grain shockwave with the supplied sabot very well and fits the bore perfectly. I am not sure of the diameter of the bore or that bullet/sabot combo. I don't have any mics around here or I would measure it. |
no, this one will shoot conicals and sabots :D
he should give the maxi balls or maxi hunters a try in it. I doubt you'd let him shoot powerbelts so the maxi's and even the hornady great plains would be a good start. |
Originally Posted by MountainDevil54
(Post 3767360)
no, this one will shoot conicals and sabots :D
he should give the maxi balls or maxi hunters a try in it. I doubt you'd let him shoot powerbelts so the maxi's and even the hornady great plains would be a good start. |
All times are GMT -8. The time now is 10:26 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.