HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   Looking for... (https://www.huntingnet.com/forum/black-powder/336562-looking.html)

smokey92 12-18-2010 05:10 AM

Looking for...
 
A sabot recommendation. Bought a box of Speer Gold Dot (.452) 250gr GDHP bullets. The sabots I've been able to find locally are MMP .451, or Harvester .452. Which one should I try? Or both maybe?

Breechplug 12-18-2010 05:27 AM

MMP HPH 24's
(BP)

lemoyne 12-18-2010 06:52 AM

Well like how much accuracy you try for that can be a personal choice.
Personally I determine what will fit and try every thing that will work since barrel whip or vibration enters into it. If they fit right they should shoot decent but you could be talking about the difference between a 1inch group and a 2 inch group, which some people care about and some don't.

sabotloader 12-18-2010 07:34 AM

smokey92

I would greatly depend on which rifle you are shooting. Your bore size will detirmine which 451/452 x 50 sabot you might need.

smokey92 12-18-2010 02:34 PM


Originally Posted by sabotloader (Post 3743494)
smokey92

I would greatly depend on which rifle you are shooting. Your bore size will detirmine which 451/452 x 50 sabot you might need.

Thanks all. The rifle is a CVA Kodiak Pro .50 cal. A 2" 3 shot group is OK for hunting IMO. Terminal performance is important also. Appreciate all advice.

sabotloader 12-18-2010 02:40 PM

smokey92

The MMP HPH-24, Harvester Short Black or Long Black - should fit it, but I might suggest a Harvester Crush Rib to make sure...

Have you shot a sabot with a .452 bullet before?... i shoulda asked that in the first place....

smokey92 12-18-2010 03:00 PM


Originally Posted by sabotloader (Post 3743730)
smokey92

The MMP HPH-24, Harvester Short Black or Long Black - should fit it, but I might suggest a Harvester Crush Rib to make sure...

Have you shot a sabot with a .452 bullet before?... i shoulda asked that in the first place....

Only about a 100 through this rifle, that came with sabots.

sabotloader 12-18-2010 03:12 PM


Originally Posted by smokey92 (Post 3743749)
Only about a 100 through this rifle, that came with sabots.

Have you got any of them left?

Assuming that they are black... Look at the bottom of the sabot in the powder cup. Does the cup have sort of a stair step effect on the inside wall or is smooth cup with a small production tit right in the center of the cup?

Or... on last option - on the outside of the petals, are the petals smooth or do they have shallow ridges?

How did they load for you? To tight - to loose or just right

smokey92 12-18-2010 03:36 PM

The ones I have with a production tit and a smooth cup are for .429 bullets, the ones with a tapered cup are for .452. Both load OK.

sabotloader 12-18-2010 03:40 PM


Originally Posted by smokey92 (Post 3743768)
The ones I have with a production tit and a smooth cup are for .429 bullets,

Those will be Harvester


the ones with a tapered cup are for .452.
I am not understanding the term 'tapered' assuming they are stepped on the side so they are MMP sabots....

And since you are loading the Harvester's I would bet the 451-452's a MMP HPH-24's

smokey92 12-18-2010 03:50 PM

Many thanks Sabotloader, you've been a great help. I've ordered the MMP HPH/24 to try with the Gold Dots. Thanks also to Breechplug.


All times are GMT -8. The time now is 08:19 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.