knight wolverine/ sabot for a gold dot
My wife has a knight wolverine and the bullets and sabots that came with it loaded,but seemed to want to come apart. they were 260 gr all lead bullets with a black sabot.anyway i have a bunch of 250 gold dots and CR sabots which load way to easy in that rifle. what are most of you wolverine shooters using for sabots.prefer not to have to buy a lot of various kinds.thanks
|
builder459
I believe you are going to need the HPH-24 or Regular Harvester - I would suggest the regular Harvester as it has the longer petals and will come off the 250 quicker and more smoothly. Then there really is a chance that you might need the HPH-12... It was built for the older Knights with the larger bores, what Knight called a .504 bore. I have not tried them yet but I believe my Knight MK is going to end up using the thicker HPH-12. |
Originally Posted by sabotloader
(Post 3740407)
builder459
I believe you are going to need the HPH-24 or Regular Harvester - I would suggest the regular Harvester as it has the longer petals and will come off the 250 quicker and more smoothly. Then there really is a chance that you might need the HPH-12... It was built for the older Knights with the larger bores, what Knight called a .504 bore. I have not tried them yet but I believe my Knight MK is going to end up using the thicker HPH-12. |
I shoot the 250 GD and use the yellow sabot. I don't remember what brand the were as I put all the sabots & bullets together last year. They shoot great.
|
builder459
i have some 250 grain SW bullets with supplied black sabots that came with my triumph.what is that sabot?, The yellow sabot that Dan is talking about is most likely a Barnes sabot built by MMP but it is built for a boat tail bullet and it is a copy of the HPH-24 other than it is a built to hold a boat tail bullet. http://www.barnesbullets.com/product.../spit-fire-mz/ |
Originally Posted by sabotloader
(Post 3740434)
builder459
Those undoubtably are HPH-24 and they would be the midsize sabot... + you are saying the thinner sabot CR is to loose... You might have a problem... The yellow sabot that Dan is talking about is most likely a Barnes sabot built by MMP but it is built for a boat tail bullet and it is a copy of the HPH-24 other than it is a built to hold a boat tail bullet. http://www.barnesbullets.com/product.../spit-fire-mz/ |
Originally Posted by builder459
(Post 3740445)
the knight 260 gr lead bullets that came with the gun were tight, they loaded but the sabot seemed cheap and flimsy.they grouped pretty good though.
|
builder459
The black sabot that came with the Knight bullets were made by Knight and they would measure .506/8 loaded. They were made to go down the .504 bore. |
Try a 458 bullet in the Harvester Crushrib if you have the sabots. They should load very well in a .504. Snug but not brutal to load. Sierra or Rem 300gr 458 HP are pretty popular and fairly cheap.
|
What i want to do is use the 250 gr gold dots i have already. i didn't like the looks of the 260 gr bullet that came with the knight rifle.i will try the hph-24's that came with the SW bullets with the gold dots which are bonded.i will find a combo that will work in it.thanks everyone for the input.
|
All times are GMT -8. The time now is 11:29 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.