HuntingNet.com Forums - Accura vs Accura V2

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Black Powder (https://www.huntingnet.com/forum/black-powder-23/)

- - Accura vs Accura V2 (https://www.huntingnet.com/forum/black-powder/336100-accura-vs-accura-v2.html)

Quote:

Originally Posted by buckeye guy (Post 3739498)

Thanks everybody, Not too crazy about hearing that the stainless steel rusting issue, everybody likes the accuracy....Guess I'll get the V2 for 40 bucks more and stay away from blackhorn powder for now...Guess I'll start with pyrodex pellets and get comfotable for deer season and then play with it with diff loads and such after the season THANKS EVERONE !!!

The V2 with a nicer stock, and the QRBP should seem worth the $40. When you get the itch to use BH, not much effort will be required.

One just drills through the flash hole to create a powder pocket, then drills part or all of the flash channel with a #21 drill, then tap 10-32 threads, and install one of them vent liner.

This afternoon my V2, with the plug on the right, made this target at 104 yard using BH209.

Quote:

Originally Posted by MountainDevil54 (Post 3739532)

i havent had any rust issues unless it gets wet from rain or such. I got some Gun Shield and THAT stuff is the best investment ever.

The rust that did occur was removed with a bit of elbow grease and off the shelf rust remover (http://milo.com/purple-powerde-ruster). And I used a Tuf-Cloth (I had left over from the Army) to wipe it down good before I went hunting in the snow last week. No problems with rust now.