T/C Omega Bore .4960?
11-18-2010, 04:46 PM
#1
Fork Horn
Thread Starter
Join Date: Nov 2009
Location: Tennessee
Posts: 126
T/C Omega Bore .4960?
I measured my Omega bore by pushing one of my old 385 gr. Buffalo bullets through the barrel.
———————————
————————————
I the used my caliper to measure the lands grooves. The measurement was consistently .4960.
This is pretty tight. The Buffalo bullet measured .5080 diameter.
Does .4960 this sound right?
———————————
————————————
I the used my caliper to measure the lands grooves. The measurement was consistently .4960.
This is pretty tight. The Buffalo bullet measured .5080 diameter.
Does .4960 this sound right?
Last edited by thom2; 11-18-2010 at 04:49 PM.
