for the sabot experts?
11-20-2010, 05:19 PM
#11
Boone & Crockett
Join Date: Aug 2004
Location: Idaho
Posts: 11,703
liquidorange
I was really hoping the Crush Rib's would work for you, but at the same time I was not taking any bets on it.
Your next option and probably the option I would have started with is run some JB's Bore Paste in the bore to polish it and remove any machining marks and debris. I had to do this to my Triumph - it took me 100 bore strokes - now I can shoot regular sabots with it without a problem.
You might take a look at this video. This is a good presentation but the Kroil oil and the pellets are not totally necessary.
http://www.brownells.com/.aspx/lid=1...G_Bore_Pellets
I did a write up on this a long time ago but I can not find it right now.
I was really hoping the Crush Rib's would work for you, but at the same time I was not taking any bets on it.
Your next option and probably the option I would have started with is run some JB's Bore Paste in the bore to polish it and remove any machining marks and debris. I had to do this to my Triumph - it took me 100 bore strokes - now I can shoot regular sabots with it without a problem.
You might take a look at this video. This is a good presentation but the Kroil oil and the pellets are not totally necessary.
http://www.brownells.com/.aspx/lid=1...G_Bore_Pellets
I did a write up on this a long time ago but I can not find it right now.
