Need a peep sight
 

I could use some advise as to what peep I should put on a CVA Plainsman.

RE: Need a peep sight
 

I don't have experience with a CVA Plainsman. If it is drilled and tapped, maybe a Williams WGRS peep sight.

http://www.cabelas.com/prod-1/0018753214918a.shtml

If not drilled and tapped, maybe a Lyman tang mounted aperature sight.

http://www.midwayusa.com/viewProduct...tNumber=620637
http://www.cabelas.com/prod-1/0009949210162a.shtml

My dad has a different style peep/aperature sight on his Lyman flintlock that also mounts
to the tang area. I think it is a Williams but I can't seem to locate a link to it.

RE: Need a peep sight
 

Spitpatch

I am not sure how it will fit on a Plainsman... but if you are considering a thang type peep site I would highly recommend the Lyman Peep. It is extremely versitile with the way it is set up. Push a button and you can raise and lower it to given ranges. It has a preset screw that you adjust for zero and from there the world is open to you. It functions 'somewhat' like the Quiqleys flip up tang sight - gosh i wish I could shoot like he did - I watch that move just to watch the shooting - I know it is not real but I THINK IT IS...


http://www.lymanproducts.com/lyman/s...ver-sights.php

http://www.lymanproducts.com/lyman/s...get-sights.php


This is one installed on my Renegade - you can see I did have to remove some wood from the stock...

RE: Need a peep sight
 

Thanks Sabotloader...

Good info..

I like the shooting BUT...I like Crazy Cora!! ( Lauren Rose);)

RE: Need a peep sight
 

Spitpatch

You know - she really was good, actually she really made the show a hit... especially at the end... when she called him 'Roy'

I fergit to say 'welcome' over here Spit, hope ya bring a a few Magillas out way also... I put your rep, exploits, and abilities rite there wit Quigley...

RE: Need a peep sight
 

I am not sure what tang peep would work for that rifle. I have a Tradition's Pioneer .50 traditional that I had a gunsmith throw a Williams Peep and it is a great little peep sight. Very accurate set up.

RE: Need a peep sight
 

http://www.auctionarms.com/search/pr...temNum=8790264

Is this a Plainsman? and does it have a tang?

I do not know never seen one...

RE: Need a peep sight
 

Well they label it as a Plainsmen, but to me it looks like a Bobcat. The Plainsman was a very simple rifle as well, and a lot of them had wood stocks as I remember. I don't own a plainsman.

RE: Need a peep sight
 

cayugad

OK.. got me?