brain fart hawkens build
 

since I ordered the wrong size barrel for my cva hawkens. I started work on an gun. I have an stock on the way, going to refinish the stock on it. was going go to do the cast steel, but some stole my idea. [:@]

thinking now of an dark finish, with silver butt plate and nose cap.

barrel is going to be brown, being sent to someone that know what they are doing to fix my problems.

comes down to, I need a lock lol.

RE: brain fart hawkens build
 

im going to take a damn movie and teach you how to brown those barrels!:D

I wont be putting the steel kit on my hawken right away, way to many projects going on this year. I should have a nice cva optima from saxman that i have to see whats wrong with,coming to me in a couple weeks i believe. See if'n these here magic fingers can help it out any.

Corey i started about 2 hours ago reshaping the lockplate on my kentucky. 2 hours and barely anything done it on! Already tore down skin on one finger and a bandaid in place. Shes gonna be rusty walnut with antique oil finish. Also putting new sights on the .58 mountain rifle.

I'll more than likely strip your barrel back down, 220 grit sand it and then start the LMF.

RE: brain fart hawkens build
 

When that Optima arrives take a good look/feel of the barrel right were they welded the forend mount to the Barrel. If you were a welder you would know that the heat from welding at first expands the metal but as it cools it contracts. In fact it contracts to a smaller size than when you first started out. This is what I refer to as drawing the steel (pulling), now it is quite posible that there is a constriction in the bore were some Idiot welded the lug to mount the forend![:@] I have lapped the tight spot out of 2 CVA/NewFornteir rifles. They both woouldn't shot for XCV#, before I lapped them, be careful that you don't enlarge the muzzle if you need to lap the thing. If you do lap the barrel, you will discover just how soft these barrels are, it wont take much and the tight spot will be gone.:D

RE: brain fart hawkens build
 

I got the stock in, screw refinishing it. it look awesome.


as for browning I just don't have your talent. MD[&:]

RE: brain fart hawkens build
 

how does that stock look corey?

by next week i should have the stain on the kentucky stock and i'll let you know how this OOL works out. I does darken the wood as i tried it on the lock area that i am working on now.

RE: brain fart hawkens build
 

great, small amount of dings, great looking wood.