![]() |
Need help with Sabot selection
Bought some bullets off of rd pettit need a some sabots for them
would like to get some that fit the loosest,for lack of a better word. 1-45cal. .452 300 grain hornaday 2-44cal. .430 240 xtp hornaday 3-44cal ..4295 240 grain sierra Thanks in advance i just like going to the store knowing what i want. |
RE: Need help with Sabot selection
Proper sabot selection depends largely on the gun. Some gunshave tight bores.
|
RE: Need help with Sabot selection
ORIGINAL: falcon Proper sabot selection depends largely on the gun. Some gunshave tight bores. I know mine does,thats why i asked the way i did. |
RE: Need help with Sabot selection
ORIGINAL: hunting junkie Bought some bullets off of rd pettit need a some sabots for them would like to get some that fit the loosest,for lack of a better word. 1-45cal. .452 300 grain hornaday 2-44cal. .430 240 xtp hornaday 3-44cal ..4295 240 grain sierra Thanks in advance i just like going to the store knowing what i want. Chap |
RE: Need help with Sabot selection
hunting junkie
If these are for your pro-hunter you should probably get the Harvester 'crush rib' in both 45/50 cal and 44/50 cal. These will give you the best opportunity to get a decent fit. The proper fit might take a little bit of experimentation when shooting 45 cal bullets, not as many options with the 44 cal. Other sabots in the 45/50 cal bank you mightr want to try is the: MMP HPH-3p-EZ Load - a thin sabot MMP HPH-24 Sabot - a little thiker but might be to tight Harvester Short Black - about the same as the 24 For the 44 cals you might check out... Harvester Regular Green sabots - a little thinner than the MMP Green sabot And the only other sabot optin is the 'Crush rib' |
RE: Need help with Sabot selection
ORIGINAL: gleason.chapman ORIGINAL: hunting junkie Bought some bullets off of rd pettit need a some sabots for them would like to get some that fit the loosest,for lack of a better word. 1-45cal. .452 300 grain hornaday 2-44cal. .430 240 xtp hornaday 3-44cal ..4295 240 grain sierra Thanks in advance i just like going to the store knowing what i want. Chap CR black: https://www.midsouthshooterssupply.com/item.asp?sku=00072H15045BR ![]() the MMP12s: https://www.midsouthshooterssupply.com/item.asp?sku=0021150045HPH ![]() The CR for smokeless are thicker and hold up to super hot loads: https://www.midsouthshooterssupply.com/item.asp?sku=00072H25045SRR ![]() I believe this is the MMP "Short Black": https://www.midsouthshooterssupply.com/item.asp?sku=0021150045 ![]() Chap |
| All times are GMT -8. The time now is 11:10 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.