Anybody have an extra breech plug wrench for a CVA?
01-31-2009 | 07:26 PM
#11
Nontypical Buck
Joined: Mar 2008
Posts: 1,621
Likes: 0
From: indiana
RE: Anybody have an extra breech plug wrench for a CVA?
TUK101Here is a pic of acouple ofbreechplugs the one on the left is for #11 or muskett caps,the right side
of it is messed up,it should look like the left side.The one on the right is for 209 primmers either way they both
take the same tool the one above them inthe pic
of it is messed up,it should look like the left side.The one on the right is for 209 primmers either way they both
take the same tool the one above them inthe pic
02-01-2009 | 06:59 PM
#12
Thread Starter
Nontypical Buck
Joined: Oct 2006
Posts: 1,042
Likes: 0
From: Spokane Washington
RE: Anybody have an extra breech plug wrench for a CVA?
I think that is it, the one that Cayugad is displaying. I take it that the left side of the picture is the side that gets the breech plug out? I am able to get the nipple out with a 3/8 socket. If you have one huntingjunkie I would surely like to get one from you. I need to get that breech plug out before it rusts solid in there.
02-01-2009 | 07:06 PM
#13
Thread Starter
Nontypical Buck
Joined: Oct 2006
Posts: 1,042
Likes: 0
From: Spokane Washington
RE: Anybody have an extra breech plug wrench for a CVA?
huntingjunkie, the one that you are showing is the universal one that I bought that didn't fit. I could probably make one out of a piece of flat stock it I tried.
02-01-2009 | 07:57 PM
#14
Nontypical Buck
Joined: Mar 2008
Posts: 1,621
Likes: 0
From: indiana
RE: Anybody have an extra breech plug wrench for a CVA?
Why won't it work,can you explain? What kind of gun is it? When you slide the wrench inare you pulling the trigger
and holding it so the wrech fits in there better
and holding it so the wrech fits in there better
02-02-2009 | 03:04 PM
#15
Thread Starter
Nontypical Buck
Joined: Oct 2006
Posts: 1,042
Likes: 0
From: Spokane Washington
RE: Anybody have an extra breech plug wrench for a CVA?
Because my breech plug end isnt octogon. It has two horizontal slots in it that the wrench fits into. Pretty close to what you are showing, and maybe the left side of your wrench is the right end, but by the picture I cannot tell for sure. It could just be me too, I am not real familiar with these types of muzzleloaders. Mine is the CVA Apollo.
