HuntingNet.com Forums - Gleason.chapman

Page 1 of 2

Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Black Powder (https://www.huntingnet.com/forum/black-powder-23/)

- - Gleason.chapman (https://www.huntingnet.com/forum/black-powder/277748-gleason-chapman.html)

bo79	12-10-2008 04:52 AM

Gleason.chapman

Can you run the table for my load and bullet? I shoot 120 grains BH209 behind a 300 gr harvester scorpion gold...i am shooting it out of a LRH so would like to know what would be reasonable for a 200 yd shot. Thanks in advance if you can do this for me...i appreciate it alot..

Jarrett

gleason.chapman

12-10-2008 05:53 AM

RE: Gleason.chapman

Quote:

ORIGINAL: bo79

Can you run the table for my load and bullet? I shoot 120 grains BH209 behind a 300 gr harvester scorpion gold...i am shooting it out of a LRH so would like to know what would be reasonable for a 200 yd shot. Thanks in advance if you can do this for me...i appreciate it alot..

Jarrett

Will look into this tonight after work. If you can find the BC of the Harvester that would be good.
Chap

bo79	12-10-2008 06:11 AM

RE: Gleason.chapman

.240+ is what i have found on a website for this bullet..does this sound right? i have no idea on coefficients...look forward to your findings..thanks very much for your work

Jarrett

DeerandbearhoG

12-10-2008 12:16 PM

RE: Gleason.chapman

http://www.handloads.com/calc/

enter the bullet dia., weight and bullet type,in the box on the left, and the bal. cal. will calculate your BC for you in The box at the top and will give you the ballistics if you enter the velocity.

gleason.chapman

12-10-2008 05:22 PM

RE: Gleason.chapman

Quote:

ORIGINAL: bo79

.240+ is what i have found on a website for this bullet..does this sound right? i have no idea on coefficients...look forward to your findings..thanks very much for your work

Jarrett

OK, this web site: http://www.blackhorn209.com/files/pdf/brochure.pdf shows the MV is about 2000 fps for 120g of BH and 300g bullets, BC of .240 and a 3" high sight in at 100 yards gives this.

Chap

gleason.chapman

12-10-2008 05:29 PM

RE: Gleason.chapman

Quote:

ORIGINAL: bo79

.240+ is what i have found on a website for this bullet..does this sound right? i have no idea on coefficients...look forward to your findings..thanks very much for your work

Jarrett

MV=2000
BC=.240
sight in= 100 yards gives this.

Your MPBR (shooting thru a 6" pipe) from 0 to 145 yardsonly.

A3" high at 100 sight in gives MPRB of 185 yards. If you sight in 3.5" high at 100 that gets you to 3.7" low at 200. Chap

bo79	12-11-2008 04:34 AM

RE: Gleason.chapman

Thanks i appreciate it...i am about 2" high at 100 yds right now...and i have been getting around 10-12 inches low at 200. Thanks for the work put into this, i will certainly use it..

Jarrett

gleason.chapman

12-11-2008 04:54 PM

RE: Gleason.chapman

Quote:

ORIGINAL: bo79

Thanks i appreciate it...i am about 2" high at 100 yds right now...and i have been getting around 10-12 inches low at 200. Thanks for the work put into this, i will certainly use it..

Jarrett

2" high at 100 with .240 BC and 2000 fps gives this table, which show only 4.7" low at 200. I will rerun it with 1800 fps, which may be what your really shooting based on your actual drop.

gleason.chapman

12-11-2008 07:32 PM

RE: Gleason.chapman

Quote:

Your welcome, you need to check these numbers with "actual", since you say your 12" low at 200.
Chap

gleason.chapman

12-11-2008 07:38 PM

RE: Gleason.chapman

Ok, here is 1800 fps, 300g bullets, .240 bc, 135 yard zero, which is 2.1" high at 100 yardsand 9.7" low at 200, which matches your results. Your MPBR is0 to 160 yards, since 160 yards is 2.8" low.
Chap

All times are GMT -8. The time now is 10:54 AM.

Page 1 of 2

Show 40 post(s) from this thread on one page