Conversion
 

Been thinking about gettin a GM barrel for my Hawken and a rock lock. ANybody know what some good options might be? I'm hopin this urge is just a flash in the pan[8D]

RE: Conversion
 

Nolehoe

I am not sure what you areasking but converting the "rock" to a "cap gun" is pretty staight forward.The inletting in thestock for the"rock" is the same as the one for the "cap" lock so get a new/used"cap" lock and drop it in... The GM replacement barrel should also drop in place - essential... there might be some slight adjustment necessary.

Next depending on what you are proposing to shoot - get the correct twist rate.... I personally would get a 1/28 twist for both conical and sabot, but I would be giving up round balls.... The 1/48 is a happy medium for conicals and round balls and it will shoot sabots. Slow twist for PRB's only...

Hope this makes some sense...

RE: Conversion
 

The Hawkins better be a T/C. Other wise Green Mountain Barrels might not fit. They do fit some Lyman and Cabela's but if you have an off brand rifle be sure to check with Kerry at Green Mountain Barrel Company before you order. In flintlocks, all you can find are the roundball and the fast twist. I do think they had a flintlock smoothbore but would not swear to it.

You might have to trim the thimble rib a little. A Dremel tool and five minutes time is all it takes. If your Hawkins is a .50 caliber currently you need a 15/16th barrel. If it is a .54 caliber then you would need the 1" flats.

The 1-28 twist barrels will shoot conicals and sabots excellent. If you want to shoot roundball, then get a 1-70 twist barrel. They are a roundball shooting machine. Get them in as big a caliber as you can if you want to hunt with it. Remember the size of your flats. The .58 requires a 1 inch flat.

RE: Conversion
 

Nolehoe

As Dave said it soes need to be a TC to be easy....

RE: Conversion
 

It's a T/C .50. cap
wanting to convert to flint and would go with the 1-28 twist. sounds like a pretty straight forward conversion. figured I could get a barrel and lock and then switch it back and forth.

RE: Conversion
 

I just bought a 21" GM Barrel from Kerry at Green Mountain for a Flintlock, 1:28 twist for $95 + $11 shipping. Cayugad had bought one and I wanted a 1:28 instead of a 1:48 twist for my TC Flintlock.
Chap

RE: Conversion
 

Wow Gleason - that was a steal. $95 for a 21" 1:28 barrel? Their site list the std 1:28 LRH for $212. How did you manage to swing such a deal. I'd like to get one of them.

RE: Conversion
 

I thought that I recall reading that the TC flint lock is not interchangable with their cap lock. There may need to be some stock modification in the form of wood removal. From there I don't know if the cap lock can simply be re-installedand beswapped back and fortheasily or not.

RE: Conversion
 

Nolehoe - I sent you an email. Get back to me.

RE: Conversion
 

Won't be able to read it til I get home. bout 5:30 or so