![]() |
Need some info
Does anyone out there have the ballistic coefficient's for these 54 cal bullets? The310 grain Buffalo Ballet, and the 410 grain TC Maxiball.
|
RE: Need some info
ORIGINAL: dmurphy317 Does anyone out there have the ballistic coefficient's for these 54 cal bullets? The310 grain Buffalo Ballet, and the 410 grain TC Maxiball. |
RE: Need some info
Thanks
|
RE: Need some info
ORIGINAL: dmurphy317 Does anyone out there have the ballistic coefficient's for these 54 cal bullets? The310 grain Buffalo Ballet, and the 410 grain TC Maxiball. 54 Cal, TC Maxi 430g has BC=.150 and SD=.207 I don't expect that the 310g Ball-et is that much different or that the 410g TC Maxi is that much different. Chap |
RE: Need some info
Thanks for the info. The 310Buffalo Ballet is a round nose like a round ball with short knurled sides and a hollow base and made a good showing in the testing my son did. The 410 Maxi is a home cast that I thought would be 430 but they weigh in at 410 +/- a bit. The numbers should be close enough, thanks.
|
RE: Need some info
ORIGINAL: dmurphy317 Thanks for the info. The 310Buffalo Ballet is a round nose like a round ball with short knurled sides and a hollow base and made a good showing in the testing my son did. The 410 Maxi is a home cast that I thought would be 430 but they weigh in at 410 +/- a bit. The numbers should be close enough, thanks. |
RE: Need some info
Thanks but don't worry about scanning it, these numbers are close enough for what I need. I'm just doing a little extra data crunching of my own on some of the data my son has got from his science fair ballisitcs experiment. I hope to have enough data from him in the next few days to post some of the results. Have a good day.
|
| All times are GMT -8. The time now is 04:52 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.