Omega Stock Swapping
 

All this stock about bedding talk finally motivated me to do what i have been planning for a couple of now.

Recently, some of you know, I purchased a new Omega Z5. I could not refuse the price, but more importantly it had a thumbhole stock that I wanted to try. The Plan was if I liked it I was going to put it on the stainless, put the regular synthetic on the Z5 and then resale the Z5. The regular synthetic has a lug block in it (to reinforcement the lug pockets) and the barrel channel sanded to allow the barrel to float. With this stock on the SS Omega - it shot 1.5/1.25 groups for me with out a problem. I had taken the laminated wood stock off the gun to reduce weight + plus the synthetic stock was easier to grip in nasty weather.

Today I decided was a good day to activate the plan... I pulled the Z5 from the thumbhole but instead of putting the regular black synthetic on it I put the Laminate stock on. I was pleasently surprised when I put the Z5 in I actually had to squeeze the two together to get the recoil lugs down into the pockets. The pockets do have ateflon shim in the bottom of the pockets. Put the screws in and snug them - checked the barrel it was foating - but man the lugs are snug in the stock - it does not move at all and of course you can not flex the laminate stock.

Next I removed the regular synthetic from the SS and installed the thumbhole. In my mind, and I will not know until I shoot it, it is a perfect fit. The lugs are very snug (no shims)and the barrel is snug in the barrel channel. No stock flex at all. It truly reminds me of a fully bedded rifle. I use to bed my centerfires, action and full length the barrel.. and that is exactly what this feels like. My original 24" Remington 700ML in it's synthetic stock fits the same way and is a great shooter.

The other side benefit is the Z5 really looks good wearing that grey/black laminate stock... not sure I am going to sale it now... not sure what I need it for or what I going to do with it but it looks good....

RE: Omega Stock Swapping
 

Looking good!!

I notice that the laminate has a cheek pad on it. Why is it that they make these rifles for iron sights only?

RE: Omega Stock Swapping
 

HuntAway

It does as does the regular black synthetic - but notice the thumbhole - no lift needed it comes with a higher comb and is just right for scopes - another thing I like about the thumbhole. The thumbhole also has lug pocket re-inforcement....

I am still thinking about buying the "lb screw driver - other wise I am still tightening by hand by feel. I am really anxious to shoot both of these guns - just do not when.

RE: Omega Stock Swapping
 

Noted, I really wish TC would make a run of lefthanded thumbhole stocks.

RE: Omega Stock Swapping
 

Good report mike very interesting. Are you planning to do some shooying with them switched around? I am planning to do a little testing my self using my Black Powder Rugar and some of the stuff we talk about on PM.
The Triumph is set up for scope instead of irons,I really like that; I hope they come out with a laminated thumb hole stock for it so I dont have to make one. Lee

RE: Omega Stock Swapping
 

lemoyne

I really want to but I go in for that replacement knee Jan 24, and next week looks shot also - got a pre-op dentist appointment on Monday - then gotta go to the Tri-cities Tuesday thru ??? to install kitchen cabinets that I built for my daughters house... Once he cuts on the kneeI will be laid up for awhile - so I just do not know when I will get it in...