crush ribed sabots
 

is there a difference in the black harvester? I have only ever seen them in green .Got a pack at cabelas and are black. says there for 45 cal.

RE: crush ribed sabots
 

sup

Theoretically.... Green "Crush Ribs" should be for a .429/.430 (44 cal)bullets to be put into a 50 cal ML. Black "Crush Ribs" are for .451/.452 (45 cal)bullets to be put into a 50 calML.

RE: crush ribed sabots
 

I'm with sabotloader- thats the way I understand it also. In fact I use both.

RE: crush ribed sabots
 

thanks sabotloader I was trying to make the 300gr hornadys load a little easier. I bought four boxes at walmart 5.00 a box. shoot great out of the encore just to hard to load

RE: crush ribed sabots
 

sup

They should load fairly easy in your Encore... I tried them in my Omega they are a little bit to loose - I normally shoot HPH-24's or regular Harvester sabots...

RE: crush ribed sabots
 

Use around 90 gr of powder. That should get you close on paper at 50 yards. Tweak it from there out-to 100 yards. You will absolutely love the way the Crush Ribs load the Hornady bullet. If your sticking primers continue, change brands of 209s.

BTW... I would have kept the Triumph - then changed both the breechplug thru a warranty exchange -and/or primer brands to cure thatproblem you had initially.