|
Rust in muzzleloader barrel
I recently just picked up my muzzleloader and the barrel was rusted pretty bad. I have cleaned it and there are considerable amounts of pitting. It is a .45 cal winchester X-150, I know the gun is not worth much anyway, but I just dont like to get ride of any of my guns. My question is, can this barrel be bored out to shoot .50 cal bullets? The barrel seems plenty thick enough, and how much do you think it would cost? Thanks for your help.
|
RE: Rust in muzzleloader barrel
How bad is bad? Have you cleaned it? Any pitting?
Its cheaper to replace the barrel than it is to rebore it. I'd give BPI a call and see what it would cost for a new one. |
RE: Rust in muzzleloader barrel
Yes there is pitting. Bad is small pits all the way down the barrel, The rifling is still there and looks good actually, besides thesmall pits everywhere.I am soaking it in kroil oil right now for one last cleaning, and will put it on paper tomorrow to check the group size.New Barrels are available for this gun?
|
RE: Rust in muzzleloader barrel
Yes new barrels are available from BPI for the X-150. If you have an owners manual, just call their # and tell them about it.
As long as the breechplug threads are okay, you'll be fine. If the barrel shoots good or not with the pitting is the main factor. If it shoots good, I wouldnt worry about the pitting. X-150's are really nice shooters. I have a .50cal SS/Camo X-150 |
RE: Rust in muzzleloader barrel
mcfadden - you may want to try and lap the bore. First you will need to make a bore plug. To do this get yourself a new 45 cal bore brush. put a couple of damp patches in the bore about 6" down and insert the brush threads out and masked. Pour molten lead into the bore around the brush and let solidify. The lead will not stick to the steel.
Once the 'plug' cools remove it from the barrel. and take out the patches with a worm. Run an oiled patch down the bore then coat your plug with J-B compound or a Comet Cleanser paste and run it back and forth down the bore. You will have to line up the rifling in the barrel with your plug every time you put it in. And this plug will only be for this barrel. It may work and save you the expense of buying a new barrel. Just don't over do it. |
RE: Rust in muzzleloader barrel
ORIGINAL: bronko22000 mcfadden - you may want to try and lap the bore. First you will need to make a bore plug. To do this get yourself a new 45 cal bore brush. put a couple of damp patches in the bore about 6" down and insert the brush threads out and masked. Pour molten lead into the bore around the brush and let solidify. The lead will not stick to the steel. Once the 'plug' cools remove it from the barrel. and take out the patches with a worm. Run an oiled patch down the bore then coat your plug with J-B compound or a Comet Cleanser paste and run it back and forth down the bore. You will have to line up the rifling in the barrel with your plug every time you put it in. And this plug will only be for this barrel. It may work and save you the expense of buying a new barrel. Just don't over do it. |
RE: Rust in muzzleloader barrel
I just so happen to have the manual for my X-150 right here. The Customer Service Department of BPI can be reached at 1-877-892-7544. Either way, clean it, shoot it and see how it goes. Any idea why it rusted? What'd you use to oil it down the last time it was cleaned?
|
RE: Rust in muzzleloader barrel
Thanks guys, If it doesn't shoot well I will try that, and thanks for the BPI number, your help is much appreciated. Branson, I have no idea what oil I used the last time, it probally wasn't cleaned for two years, I forgot I had the thing and just found it in a closet the other day, as I have not been muzzleloader hunting in a while. I just ordered some Brownells rust preventative #2 to use this time, what do you recommend?
|
RE: Rust in muzzleloader barrel
I lightly oil with plain old Rem Oil (same for all my guns) after a good cleaning. I haven't had problems yet. I'm sure there are better things out there. Maybe someone else will chime in. Let us know how it works out.
|
RE: Rust in muzzleloader barrel
i know a few guys that have let there gun rust so bad you would think they could hit anything with them ,but they keep on killin deer with them.
|
| All times are GMT -8. The time now is 03:36 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.