HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   T/C ENCORE 209x50 (https://www.huntingnet.com/forum/black-powder/220296-t-c-encore-209x50.html)

heinz57 11-30-2007 03:04 PM

T/C ENCORE 209x50
 
would like to get some feed-back [stainless steel barrel] from owners of this muzzleloader ..what are it's pros or cons ..this will be my 6 th ML and hopefully my last ...ex, is it barrel heavy ,hard to clean ,ect .....i will be useing T7 powder [pellets] 100gr. ...also .250 gr. t/c shockwave ,250 gr hornady sst ,,260gr. dead centers ..

flint head 11-30-2007 03:47 PM

RE: T/C ENCORE 209x50
 
You will enjoy it very much... They are MOA shooters. If you have a choice I would get a Pro-Hunter or if you already have a Encore frame you could just get the PH muzzleloading barrel,,, these things shoot awesome and are sooo easy to clean with the speed breech. The standard Encores are nice also they just take a little long to clean,,, these guns feel like an old glove when shouldered, warm and fuzzy;)Most Encores like to be loaded hot so try 3 777 pellets and a 250 bondedShockwave... this load will shoot 1" or less with most Encores. Some other loads you may want to try are: 3 Shockey's Gold Sticks and a 300 grain Nosler(my favorite),,, 110 grains of 2f 777 and a 260 Nosler,,, 3 777 pellets and a 290 Barnes TMZ, or 275 Parker BE. Swab between shots with the 777, don't with the Sockey's Gold... good luck!!:)

TC209x50 11-30-2007 09:59 PM

RE: T/C ENCORE 209x50
 
I've got mine shooting 1" groups at 200yrds. I love it, I shoot two sticks of Jim Shockeys Gold and a Barnes 245grain Spitfire bullet. At 100 yards It shoots 3/4" groups. I use a good Nikon scope and I've installed a Mike Bellm 2 1/2 lb. trigger with a heavy hammer spring and barrel lug. Simply the best gun I've every owned. I also Coyote hunt with it using a .308 barrel which this summer I was shooting crows at 330yards.

falcon 12-01-2007 07:41 AM

RE: T/C ENCORE 209x50
 
My Encore likes the 250 grain SST and 90-120 grains of Jim Shockey Gold powder. It will also shoot very small cloverleafs with the 240 grain XTP bullets and 100 grains of 777, but only if the bore is swabbed after every shot.

Michbowhunter 12-02-2007 05:35 PM

RE: T/C ENCORE 209x50
 
I've owned a T/C Omega and now have a Pro Hunter, and I would recommend the Pro Hunter to anyone! Its without a doubt the nicest gun I've ever owned! Not that the Omega wasn't nice, because it was an awesome ML, however, the Pro Hunter has far exceeded my expectations!

I could shoot this gun all day long!

heinz57 12-02-2007 05:50 PM

RE: T/C ENCORE 209x50
 
yes i handled the PRO very nice but i wanted a 26 inch barrel

heinz57 12-03-2007 05:40 AM

RE: T/C ENCORE 209x50
 

ORIGINAL: heinz57

yes i handled the PRO very nice but i wanted a 26 inch barrel
too bad T/C did not put a "limbsaver recoil pad " on the ENCORE now i have to buy one ,also they should have installed the " E-Z TIP EXTRACTOR " so u can remove the breech plug without having to take the gun apart ..

Tahquamenon 12-03-2007 12:32 PM

RE: T/C ENCORE 209x50
 
The Encore is an exceptional ML as is the Omega. My encore is a standard 50 cal blue with walnut furniture. If you get one make sure it has or add the ez-extractor. Cleaning is not a big deal.

That said, I think if one were not interested in the barrel interchangeability then you are spending more in an Encore for the centerfire frame that could be spent on optics.

Best thing is to shoulder severalML'sand pick the one that feels the best to you that also hold a strong reputation for quality and reliability.

Also, it makes little sense to me to buya nice ML and put el-cheapo optics. Go with the best you can afford and you will never regret it.

;)

M2C,

Tahquamenon

Michbowhunter 12-03-2007 05:20 PM

RE: T/C ENCORE 209x50
 

ORIGINAL: heinz57


ORIGINAL: heinz57

yes i handled the PRO very nice but i wanted a 26 inch barrel
too bad T/C did not put a "limbsaver recoil pad " on the ENCORE now i have to buy one ,also they should have installed the " E-Z TIP EXTRACTOR " so u can remove the breech plug without having to take the gun apart ..
Both of these features do come on the Pro Hunter.

heinz57 12-03-2007 05:50 PM

RE: T/C ENCORE 209x50
 
yes i know i have handled the pro ..also for the ENCORE is saw this piece of equipment to upgrade the ENCORE ,has anybody installed it on they're ENCORE......

http://www.prbullet.com/e-pin.htm


All times are GMT -8. The time now is 01:53 AM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.