THOMPSON CENTER PRO HUNTER
anyone had a problem with the winchester triple 7 209 primers in a tc pro hunter?remington kleanbores and cci's will let my barrel close but when i try to use the winchester's the barrel wont lock unless i close it hard3 or 4 times them it will close and let the hammer cock.
|
RE: THOMPSON CENTER PRO HUNTER
I've actually used the Triple 7 primers for my last 100 shots and had the problem with 1 of them. I just figured it was seated properly and when I reopend and closed the action, it worked fine.
|
RE: THOMPSON CENTER PRO HUNTER
Check that your breech plug and its seat are completely clean and that the plug is seated properly with no burrs or dirt ect on the seat. They work fine for most of use. Lee
|
RE: THOMPSON CENTER PRO HUNTER
How much you lookin to spend...i can get you one
|
RE: THOMPSON CENTER PRO HUNTER
I use the Vari-Flame adapter from Precision Bullet with CCI large rifle primers. Cabelas sells them. Was skeptical at first but there is definately accuracy improvement over shotshell style primers. It works great with no problems.
|
RE: THOMPSON CENTER PRO HUNTER
the remington and cci's are working fine,but you put a winchester triple 7 209 in and the barrell wont lock unless you slam it 4 or 5 times
|
RE: THOMPSON CENTER PRO HUNTER
I have no experience with your rifle or problem, but have you contacted Thompson Center with this? Spending the kind of money you did for such a quality rifle, they had better have answers...
|
RE: THOMPSON CENTER PRO HUNTER
Might not be the gun'sproblem. After all, the Remington and CCIs work OK. Maybe that lot of Winchester primers has an extra thick or malformed flange.
(Anyway, CCIs are better than Win T-7s, at least in my gun.) |
RE: THOMPSON CENTER PRO HUNTER
I have used T7 cci and remington primers in my encore w/o problems Also variflame adaptor. I would calllT C and winchester.
|
RE: THOMPSON CENTER PRO HUNTER
I have had the same problem. The triple 7 primers are about .003 - .004 longer than the other primers. I like the fact that they fit so tight there is no blow back. you won't like this but, I put my plug in a vice, eye 7 ear protection and placed each primer in the plug and LIGHTLY tapped it with a flat faced hammer. It reduces the length of the primer and they work fine. No nothing went off!!!
|
All times are GMT -8. The time now is 11:01 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.