![]() |
RE: Buffalo 375 gr. SSB
I read somewhere that when they first tried the bullet someone commented that it was a
"Shooting Son of a B#%$@. Then they had to come up with a market name so they called it a Special Sabot Bullet to use the same letters. Not sure it was true but a good story. I also like the heavier ones. |
RE: Buffalo 375 gr. SSB
[
trharder, For a given muzzle velocity, no muzzleloading bullet shoots flatter than the 375 SSB other than the 435 SSB. The 375 SSB has a LEGITIMATE 100 yard BC of .290. You've shot them already so should remember the sleek, slender, pointed bullet. There is no hype in the BC. With open sights, the sight height is small enough that you need to higher at 50 yards to get good POI at 100 yards. Just lift that rear sight and you will get where you want to be at 100 yards. [/quote] Maybe I just wasn't pushing them hard enough. I never used more than 100 grains of 777 2f. With that load I was a little disappointed about how far they dropped when I went to 150 yards. They are a pretty bullet. |
RE: Buffalo 375 gr. SSB
ORIGINAL: trharder [ trharder, For a given muzzle velocity, no muzzleloading bullet shoots flatter than the 375 SSB other than the 435 SSB. The 375 SSB has a LEGITIMATE 100 yard BC of .290. You've shot them already so should remember the sleek, slender, pointed bullet. There is no hype in the BC. With open sights, the sight height is small enough that you need to higher at 50 yards to get good POI at 100 yards. Just lift that rear sight and you will get where you want to be at 100 yards. when I went to 150 yards. They are a pretty bullet. [/quote] What is cost/bullet for these? Chap Gleason |
RE: Buffalo 375 gr. SSB
ORIGINAL: gleason.chapman What is cost/bullet for these? Chap Gleason |
RE: Buffalo 375 gr. SSB
Chap, They run about $18 - $20 for 36 of them. They come with sabots included. I suppose you should include shipping. |
RE: Buffalo 375 gr. SSB
ORIGINAL: cayugad Now the 285 grain I do not like. I also tried some of their other weights and did not have much luck, but the 375 is a stand by load. I just bought 180 of the 285 and was wondering why you don't like them. Let me know if you would. Paul |
RE: Buffalo 375 gr. SSB
ORIGINAL: Pglasgow Chap, with shipping they are around 50 cents each. One other place that sells them cheaper is bud'sgun shop. Thanks Chap |
RE: Buffalo 375 gr. SSB
ORIGINAL: gleason.chapman ORIGINAL: Pglasgow Chap, with shipping they are around 50 cents each. One other place that sells them cheaper is bud'sgun shop. Thanks Chap http://www.budsgunshop.com/catalog/product_info.php/products_id/24556 http://archery-experts.stores.yahoo.net/bububu.html |
RE: Buffalo 375 gr. SSB
ORIGINAL: Newhunter1 at work ORIGINAL: cayugad Now the 285 grain I do not like. I also tried some of their other weights and did not have much luck, but the 375 is a stand by load. I just bought 180 of the 285 and was wondering why you don't like them. Let me know if you would. Paul |
RE: Buffalo 375 gr. SSB
I also bought 6 boxes of the 285's based on past experience in my MagBolt. I was getting around 1.25 to 1.5 inch groups at 100yusing 100gr of 777 2F for a velocity of around 1750fps. When I tried them in my GPH they didn't group very well, 14" at 75y using 90gr of 777 3F. For the GPH I think I need a tighter sabot as they went down almost by themselves. I did find 1 sabot and it looked ok but the grouping was not usable. I will need to try some other combinations with them to see if I can find something that works. In the mean time I have a load for the 285's that works in at least one of my guns.
I may need to try out some of these heavier SSB's in my GPH to see how they do for long range possibilities. |
| All times are GMT -8. The time now is 06:14 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.