TC 17 Bore Cleaner
 

Is there a way to make something similar to TC 17 that doesn't cost as much? I here people talking about windshield wiper fluid and alcohol. If this is what they use how would you mix it?

Thanks in Advance

RE: TC 17 Bore Cleaner
 

First off welcome to the forum.

The 50/50 mix of isopropyl alcohol and car windshield washer fluid will work as a bore swab and help to clean the fowling from the barrel. It will not remove lead, copper, or plastic fowling. It also will not protect the barrel from rust after cleaning.

RE: TC 17 Bore Cleaner
 

utah_1

Easier than mixing a solution - I use just regular old windex - it does an excellent job. It just plain disolves t7 crud....

RE: TC 17 Bore Cleaner
 

Does TC 17 remove the fouling from lead , copper, and plastic? Propably another one of my beginner questions?

RE: TC 17 Bore Cleaner
 

I use "Simple Green" for most of my cleaning - followed by a patch or 2 of alcohol to remove any of the residue. I always use a brush as well.

Don't shoot plastic or copper, but keep some Butch's Bore Shine around for the occasional time I think I might have some leading. I believe it would remove copper and plastic as well.

My bores all shine.

Steve