HuntingNet.com Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Black Powder (https://www.huntingnet.com/forum/black-powder-23/)
-   -   Power Belt bullet skirts/found something new!!! (https://www.huntingnet.com/forum/black-powder/146873-power-belt-bullet-skirts-found-something-new.html)

chaz3815 07-05-2006 12:16 AM
RE: Power Belt bullet skirts/found something new!!!
 
The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner

Triple Se7en 07-05-2006 08:33 AM
RE: Power Belt bullet skirts/found something new!!!
 
ORIGINAL: chaz3815

The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
Products like this - with no need for the hi-lo driver to pull the oldest palletfirst, will often find a mixed-bag of production numbers inside. Stuff like this only gets rotated when the product gets an occasional update/revamp. The bin that these sabots may get dumped into - prior to packaging, may hold several boxes/bushels from past productions without product rotations needed.

If you are insistent to learn more, call Del Ramsey at MMPsabots.comfor a complete explanation on manufacturing& packaging.

BS 07-05-2006 10:38 AM
RE: Power Belt bullet skirts/found something new!!!
 
ORIGINAL: Triple Se7en

ORIGINAL: chaz3815

The numbers are in the mold . By the way all plastic molds have them that way the bad cavity can be identified at the plant . If you look on anything plastic you will find them. On much bigger parts you can find the date code .
Sundowner
Products like this - with no need for the hi-lo driver to pull the oldest palletfirst, will often find a mixed-bag of production numbers inside. Stuff like this only gets rotated when the product gets an occasional update/revamp. The bin that these sabots may get dumped into - prior to packaging, may hold several boxes/bushels from past productions without product rotations needed.

If you are insistent to learn more, call Del Ramsey at MMPsabots.comfor a complete explanation on manufacturing& packaging.
Small parts like these will be multi-cavity, looks like at least 24....0-23 or 1-24.............and they all go into the same bag or box, then off to the buyer. They don't sort the 1s and the 2s seperate, they all get mixed together......................and are counted by weight.


All times are GMT -8. The time now is 05:51 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.