Tight Bores! MMP has a new SABOT
#11
Nontypical Buck
Join Date: Feb 2003
Location: Moravia NY USA
Posts: 2,164
RE: Tight Bores! MMP has a new SABOT
Mike and Patrick,
I appreciate your reports and heads up. I have an Omega that's been giving me fits - finally gotreasonble groups with 250 TC shockwaves and hph-24 sabots. But even with swabbing every shot, still real hard to load.
Looking forward to try the 3p's.
Thanks again
Steve
I appreciate your reports and heads up. I have an Omega that's been giving me fits - finally gotreasonble groups with 250 TC shockwaves and hph-24 sabots. But even with swabbing every shot, still real hard to load.
Looking forward to try the 3p's.
Thanks again
Steve
#13
Join Date: Nov 2005
Location:
Posts: 206
RE: Tight Bores! MMP has a new SABOT
Excellent post as always, good information for
those of us with the tight bores. Glad you got
to do the testing for these new one's. Keep us
posted on the results, and the R&D you are doing
for them. Danny
those of us with the tight bores. Glad you got
to do the testing for these new one's. Keep us
posted on the results, and the R&D you are doing
for them. Danny
#14
Nontypical Buck
Join Date: Feb 2003
Posts: 3,092
RE: Tight Bores! MMP has a new SABOT
Seems to me the two posters picked for this test could be counted on to give honest summaries of their results .... and even know how to post targets showing those efforts. Good job guys.
#15
RE: Tight Bores! MMP has a new SABOT
I just called MMP and ordered some from Connie. I askedher if"the new, 3 petal sabots for 50/45 were available yet." She said they're available if you specifically ask for them, but they're not ready to be advertised yet. They don't have the packaging and instructions ready yet. Seemed like real nice folks.
IM jaybe
IM jaybe
#16
Giant Nontypical
Join Date: Nov 2005
Posts: 6,585
RE: Tight Bores! MMP has a new SABOT
Underclocked,I agree 100%,why is it some people seem to have a problem with us doing our own testing? They selling some thing?
Jaybe thanks for that info,their are some others beside me that will be interseted. Lee
Jaybe thanks for that info,their are some others beside me that will be interseted. Lee
#17
RE: Tight Bores! MMP has a new SABOT
jaybe
MMP folks, I know we have e-mailed back and forth about this, but the people at MMP a real people running a big business - but they stand on the same ground with you and I - they are really aswesome folks set to HELP us. I just wish AR was closer to Idaho so I could go tell them personally. Theywill bend all over the place to help.
MMP folks, I know we have e-mailed back and forth about this, but the people at MMP a real people running a big business - but they stand on the same ground with you and I - they are really aswesome folks set to HELP us. I just wish AR was closer to Idaho so I could go tell them personally. Theywill bend all over the place to help.
#18
Giant Nontypical
Join Date: Nov 2005
Posts: 6,585
RE: Tight Bores! MMP has a new SABOT
sabotloader,I do live in AR,North Central, Heber Springs to be exact are they any where in my area? I do travel a bit I might just stop and see if they are in the mood to vist if I can locate them. If you should get down this way I live on Greers Ferry lake where the BIG walleyes grow the local biologist says there is a bigger than the record one out there.Lee
#20
Guest
Posts: n/a
RE: Tight Bores! MMP has a new SABOT
I hope they don't quit offering the tight ones. I have great luck with the tight ones. Like the barnes expanders used to be. Now I have to put subbases under them to get same accuracy with 130gr 777 loads as I used to.
I like them tight.
I like them tight.