New hammer extender for T/C Encore by "Bellm"
 

For those whohave a T/C Encore with a scope mounted and little clearance to reach the hammer. I just received the newredesigned hammer extender from Bellm's for myT/C Encore and it fits perfectly. Has 3 set screws to lock it on the hammerspursecurely with minimal torque required on the set screws. Eliminates any forward movement.Made for high quality aircraft aluminum so there is virtually no weight to cause any damage to the hammer spur. Access to the hammeris a dream with or withouta scope installed.

FYI.....T/C voids the warranty if a hammer extender is installed. The heavier steel hammer extenders from other manufacturerswere known to cause damage to the hammer spur if torqued to tightlyor the weightcould possibly cause the hammer spur to bend or break according to T/C.

http://www.bellmtcs.com/store/index.php?cid=1

RE: New hammer extender for T/C Encore by "Bellm"
 

I have had that problem with other guns but I get plenty of clearance on all three of my Encores barrels. I know I am lucky seen people with that problem.