HuntingNet.com Forums - Bolt in a Rem.700ML

HuntingNet.com Forums (https://www.huntingnet.com/forum/)

- Black Powder (https://www.huntingnet.com/forum/black-powder-23/)

- - Bolt in a Rem.700ML (https://www.huntingnet.com/forum/black-powder/1294-bolt-rem-700ml.html)

Bow-4-It

01-11-2002 06:41 AM

Bolt in a Rem.700ML

I know it comes apart to clean it. Can anyone tell me how? Thanks in advance.

Zeak	01-11-2002 11:26 AM

RE: Bolt in a Rem.700ML

Bow-4-It Just hook the sear on something that has an edge on it and pull on the front of the bolt, and a little groove will show in the back of the bolt. I just use a dime and stick in the groove and let the presure off the bolt. Now the back end will Just unscrew and your firing pin will come out. Very important do do in cold weather,or it would not hit the cap hard enough to set it off. Use something like WD-40 to lube with, not gun oil.

Deleted User

01-11-2002 11:41 AM

[Deleted]

[Deleted by Admins]

MUSHER

01-11-2002 12:33 PM

RE: Bolt in a Rem.700ML

Go to this site : http://www.remington.com/Support/700mlclean.htm

You will have everything you want.

Bow-4-It

01-11-2002 06:47 PM

RE: Bolt in a Rem.700ML

THANKS for the info. I just got back from cleaning 'er with no problems.:)

porkypine

01-12-2002 03:43 PM

RE: Bolt in a Rem.700ML

My owners manual decsribes it in the cleaning section. Remington also says to use only "Rem oil" for your information.

All times are GMT -8. The time now is 02:15 AM.