HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Big Game Hunting (https://www.huntingnet.com/forum/big-game-hunting-6/)
-   -   Dragging a bear (https://www.huntingnet.com/forum/big-game-hunting/392930-dragging-bear.html)

Ridge Runner 07-13-2014 02:49 PM


Originally Posted by cbul (Post 4148638)
I have looked at some plastic rolled up game draggers but never used one.
Anybody use one?

Years ago I used a kids sled for deer with some success. But I really never cared about hair on a hide before .

Thanks in advance!

yep they shred pretty easy, I use a sled made out of a blue plastic barrel, easiest bear dragging I ever did, they are indestructible
RR

buffybr 07-13-2014 03:34 PM


Originally Posted by cbul (Post 4148638)
I have looked at some plastic rolled up game draggers but never used one.
Anybody use one?

Years ago I used a kids sled for deer with some success. But I really never cared about hair on a hide before .

Thanks in advance!

Years ago I bought a heavy duty plastic rolled up game dragger (I think from Cabela's) that I've used to drag a couple of deer and two elk, half at a time. It makes the dragging easier, even over snow, and it protects the animal.

Another time I used a kids plastic toboggan to drag another elk out, again, half at a time. I got the elk out, but the toboggan was trashed.

I've also used several wheeled game carriers.

The first one was a single wheel "travois" type that I made from a bicycle wheel and lightweight steel tubing. It worked OK, but half of the weight is in your hands.

I then bought a two wheel carrier from Cabela's that I've carried up to two antelope at a time over several miles of eastern Montana sagebrush. It's a little tippy on side hills, especially when one wheel goes over a bush or rock.

A few years ago I built a two inline wheel carrier. I used 20" heavy duty spoke wheels with solid rubber tires, and welded square steel tubing. It would pack half an elk with two people operating it.

Two of us carried out my first black bear slung under a pole, and two of us also carried out a whitetail buck that I wanted to have mounted that way. It is easy to get the animal swinging if the two people don't stay out of step.

car 07-14-2014 05:05 AM

One year I shot a sm bear in Maine and i used a heavy duty vinyl tarp. It worked well for being by myself. Did the same thing in the prairies of Wy with a 300 lb mule deer. Worked really good there. Tarp was trash when we were done.

BarnesX.308 07-15-2014 02:16 AM

Used a plastic toboggan this year. But you still need multiple people. Somebody has to be with the bear because it rolls off the toboggan every 5 seconds.

cbul 07-15-2014 07:26 AM

I had took a plastic toboggan or sled years ago for deer....and drilled holes around the lip to lace 1/4" rope as a tie down. The sled would only hold the front should shoulder and most of the chest and the rear quarter would drag. It worked better than nothing. Still had a buddy help as misery loves company. I was thinking the the plastic sled may be a bit small for a adult bear that is if ......a big if......I get to see one then arrow or shoot it.

Thanks guys keep what has worked or not worked so well coming!

Topgun 3006 07-15-2014 01:24 PM


Originally Posted by Ridge Runner (Post 4148654)
yep they shred pretty easy, I use a sled made out of a blue plastic barrel, easiest bear dragging I ever did, they are indestructible
RR

This sounds like the best way if you can't butcher the animal on the spot and bring it out in a lot of pieces. I know the barrels are just as RR stated!

Champlain Islander 07-15-2014 02:02 PM

I have never shot a bear and don't intend to. I have killed almost everything else but bears just don't interest me for some reason. I have been involved with hunts where others have killed a bear and dragging them is not really an easy option. Nothing like a deer and they snag everything out along the woods. When we have a bear that needs to be brought out we either sling it to a pole and get enough help to get it out or put it on a game cart. Here in Vermont there are a lot of bears and when one is taken the animal has to be checked in intact other than the field dressing so quartering and skinning in the field isn't an option.

Elkshed 08-03-2014 12:01 PM

Dragging a bear out
 
When I drag my bear out I cut two poles about 10 ft long.Then lash some smaller cross pieces to it like a stretcher. Then tie bear or deer on and drag out.I have moved them over 4 miles this way.The last bear I shot spring of 2014 I did it a little different. I cut 2 poles and tied them to my pack frame then strapped on the bear. It worked also. Thinking about packing a small wheel and lag screw or some sort of brackets for an axle to make it easier. Game carts would be a chore to pack in where I hunt. I like to keep it light.
Good luck.

Power 08-18-2014 12:55 PM

Got mine out whole with an elk cart and a couple buddies to help. Over 6' cinnamon.

dougl 08-18-2014 02:21 PM


Originally Posted by Bocajnala (Post 4148589)
In PA you have to check the bear in whole, it can be gutted, that's all though. If you have to drag it, use a cart, sled, tarp, try to protect it somehow.
-Jake

There's no such law in Pa.You can bring them in quartered but there has to be evidence of sex.


All times are GMT -8. The time now is 04:35 AM.


Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.