HuntingNet.com Forums

HuntingNet.com Forums (https://www.huntingnet.com/forum/)
-   Automotive (https://www.huntingnet.com/forum/automotive-60/)
-   -   vacuum diagram needed (https://www.huntingnet.com/forum/automotive/293278-vacuum-diagram-needed.html)

ndncreek 05-02-2009 09:03 PM

vacuum diagram needed
 
i need a vacuum diagram for a 1986 ford f150. inline 6 cyl., standard, 4x4, fuel injected. i looked online but everone wants money. i'd appreciate it, all i need is a picture of it from the underside of the hood.

Mastevt 05-03-2009 06:23 AM

RE: vacuum diagram needed
 
ford had a molded set of vacume lines if I remember correctly, They're wasn't a whole lot of vacume lines on that motor. Black was manifold vacume, red was to the fuel pressure regulator, green was to the EGR I believe. Not much else after that. Distributor was all electronic, so no vac. there. I'm at work, I'll look to see if we have any old manuals laying around, If I finds something, I'll let ya know.

Mastevt 05-03-2009 06:32 AM

RE: vacuum diagram needed
 

ORIGINAL: ndncreek

i need a vacuum diagram for a 1986 ford f150. inline 6 cyl., standard, 4x4, fuel injected. i looked online but everone wants money. i'd appreciate it, all i need is a picture of it from the underside of the hood.
I looked and found an 87 book from ford. It shows that the L6 was Carberated for an 86 model year, not Fuel Inj. You might want to verify what you got!

ndncreek 05-03-2009 07:33 AM

RE: vacuum diagram needed
 
it's fuel injected and there's alot of hoses on this truck

Mastevt 05-03-2009 08:10 AM

RE: vacuum diagram needed
 
My advise is to write your VIN # down, and call the local dealer. Talk to the service adviser, give him your vin, and ask him to run it on OASIS. He should at that point be able to tell you what exactly you have, because they didn't have fuel injection in 1986. He should also be able to get you the vac. diagram off the ford website. Good luck.

ndncreek 05-03-2009 09:20 AM

RE: vacuum diagram needed
 
i appreciate your help and i've called the dealership but they don't have any of the info i need or he just didn't want to get it for me. i even asked for a website but he couldn't or wouldn't help me. but i'll try using the vin # and go that route. again thanks for the help

Mastevt 05-03-2009 10:33 AM

RE: vacuum diagram needed
 
try a differant dealer, if you still get a dead end, pm me your vin #, I got a local dealer that I'm in with, He maybe able to run it for me. Can't promise anything tho. I'm not familiar with what the dealers have access to anymore, Its been awhile since I worked at one. But I'll give it a shot for ya.

Swampdog 06-01-2009 02:02 AM

RE: vacuum diagram needed
 
Try this link .You might be able to get the information you need.




http://www.ford-trucks.com/forums/index.php


All times are GMT -8. The time now is 05:23 AM.


Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.