2010 Hoyt Alphamax35, custom Z3 cams AND #2 XTR cams, 28.5" DL Z3, 27-29" DL XTR's
05-04-2011, 10:22 PM
#1
Nontypical Buck
Thread Starter
Join Date: Feb 2007
Location: SE Ohio
Posts: 2,531
2010 Hoyt Alphamax35, custom Z3 cams AND #2 XTR cams, 28.5" DL Z3, 27-29" DL XTR's
I have a PERFECT 2010 Hoyt Alphamax35, the bow was a Hoyt Custom Build Z3 Alphamax35, w/ Z3 4.5 cams that make it a 28.5" DL, draws about 64# right now with the Z3 cams on it. I also have a set of XTR cams and strings to go with it w/ a 28" Module. The bow is set up with a Fuse/Hoyt Acculaunch Drop-away, Fletcher Tru-peep, Loop, and Extreme RT1100 4-pin sight in matching APG camo. All you need to do is pick a quiver and stab and you're ready to go. The bow is in PERFECT condition, not even a mark from a set screw from a rest. I also have a Kaz-away rest if you'd rather have that than a Fuse/Hoyt Acculaunch Drop-away.
As it sits bow, rest, sight, extra strings and cams.....$600 shipped.
Side by side, I shot one of these Z3 bows next to the Carbon Matrix, Carbon Element, Z7, CRX32, CRX35, and I couldn't see where any of these bows would ever be an upgrade, thus I'm keeping the 29" Z3 cam bow that I have.
Pic of the bow bare
Hoyt 180 Grip on bow...
As it sits bow, rest, sight, extra strings and cams.....$600 shipped.
Side by side, I shot one of these Z3 bows next to the Carbon Matrix, Carbon Element, Z7, CRX32, CRX35, and I couldn't see where any of these bows would ever be an upgrade, thus I'm keeping the 29" Z3 cam bow that I have.
Pic of the bow bare
Hoyt 180 Grip on bow...
