E4 cams for E5s or E6s or would buy
 

My Allegiance draw is too long. New bow bought on ebay. Not as ajustable as I thought if you want nice letoff and valley. So I need E5s or 6s and have E4s--28.5 inches.

RE: E4 cams for E5s or E6s or would buy
 

Am I understanding that the ones you have are at 28.5 inches? If so, I would be interested in picking them up from you if the price was right.

RE: E4 cams for E5s or E6s or would buy
 

Thanks for your interest W.A. I haven't found any shorter than 28.5 yet. Did learn from Bow Tech today tho that any dealer should be willing to change those no problem. Also have been comparing draw length on the cams to lengths on last years Pro 40 duallys and some others I have, and am finding these new ones to run about one half in. shorter. So I may be ok after all. Will have to shoot this one for a bit. If I change now, it wouldn't be for more than 1/2 in shorter. In other words, the E-5 cam.at 28 in. On the duallys, I've been shooting both the 27.5 and the 28. Hard for me to part with those bows, and I may not. Will keep you in mind.

RE: E4 cams for E5s or E6s or would buy
 

Hunterrog,

Correct, the binary cams seem to be about 1/4" shorter drawlength than the single and dual cam bows. The cams can be changed in 1/2" increments, for a cost of $60 at any BowTech Pro Shop.

My proposal was for the cams only. I currently have 29" cams and would like to go down to 28.5" cams.

I would give$30 plus shipping, this would be a good deal for both of us, getting our bows right for half the cost.

Let me know.